Rectifiers, electronic component-type (except semiconductor), manufacturing · Arizona
Pure Wafer
PRESCOTT, AZ · ~102 workers · 4 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.7
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Pure Wafer runs at 142% of its industry's injury rate - more dangerous than the typical Rectifiers, electronic component-type (except semiconductor), manufacturing workplace, earning a grade D.
- D
- Poor Safety Record
- 4.7
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 18
- recordable injuries tracked
Grade compares Pure Wafer's OSHA Total Case Rate to the BLS industry benchmark across 4 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
Pure Wafer's yearly Total Case Rate, against the 3.3 industry benchmark.
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 334419.
Where Pure Wafer falls in its industry
404 Rectifiers, electronic compone establishmentsSafer than 11% of graded establishments in this industry, whose median TCR is 1.3.
Pure Wafer has an average TCR of 4.7, which is 142% of the industry average (3.3) for Rectifiers, electronic component-type (except semiconductor), manufacturing. This is worse than average.
Safety Insights for Pure Wafer
Pure Wafer operates an establishment with approximately 102 full-time equivalent workers in PRESCOTT, AZ, classified under the Rectifiers, electronic component-type (except semiconductor), manufacturing industry (NAICS 334419). Across 4 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 18 recordable injuries, 1 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 4.7 injuries per 100 full-time workers per year provides the anchor metric for the D letter grade (Poor Safety Record).
Benchmarked against the Bureau of Labor Statistics industry average of 3.3 for Rectifiers, electronic component-type (except semiconductor), manufacturing, Pure Wafer's workforce experiences 142% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked, a 200,000-hour exposure base equals roughly 100 full-time workers, so establishments with very different headcounts can be compared directly. A TCR above the benchmark flags a higher-than-typical risk profile for jobseekers, insurers, and enforcement agencies to examine.
Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 4 reporting cycles points to systemic hazard exposure. Readers evaluating Pure Wafer as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries, there is no modeling, estimation, or third-party adjustment layered on top of the government data.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Pure Wafer's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 334419 - Rectifiers, electronic component-type (except semiconductor), manufacturing.
DART Rate, Transparent Calculation (2024)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
4 DART incidents × 200,000 ÷ 165,189 hours worked = 4.84 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Pure Wafer (this establishment) | 4.69 | OSHA ITA Form 300A, 4-year avg |
| Tubes, electronic, manufacturing industry avg | 3.30 | BLS IIF, NAICS 334419 |
| Arizona state avg (all industries) | 4.73 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Pure Wafer to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 4 reportable incidents · 3 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 5 reportable incidents · 5 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 4.8 | 4.8 | 3 | 1 | 0 |
| 2023 | 4.8 | 4.8 | 5 | 0 | 0 |
| 2017 | 3.8 | 2.8 | 4 | 0 | 0 |
| 2016 | 5.3 | 5.3 | 6 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Pure Wafer's reported OSHA injury record versus its Rectifiers, electronic component-type (except semiconductor), manufacturing peers, not a verdict on whether any single site is safe today.
- At 142% of the Rectifiers, electronic component-type (except semiconductor), manufacturing benchmark, Pure Wafer reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Rectifiers, electronic component-type (except semiconductor), manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Pure Wafer's safety grade?
How is the safety grade calculated?
How many injuries has Pure Wafer reported?
Where does PlainSafetyScore get its data?
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.