Cable splicing, electrical or fiber optic · Michigan
Quad Electronics, Inc.
Troy, MI · ~116 workers · 3 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.0
- Avg TCR
- 2.8
- Industry avg
- 0
- Fatalities
The verdict
Quad Electronics, Inc. runs at 143% of its industry's injury rate - more dangerous than the typical Cable splicing, electrical or fiber optic workplace, earning a grade D.
- D
- Poor Safety Record
- 4.0
- avg TCR · per 100 workers
- 2.8
- industry benchmark (BLS)
- 12
- recordable injuries tracked
Grade compares Quad Electronics, Inc.'s OSHA Total Case Rate of 4.0 to the Cable splicing, electrical or fiber optic BLS benchmark of 2.8 (143% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Quad Electronics, Inc.'s yearly Total Case Rate, against the 2.8 industry benchmark.
Where Quad Electronics, Inc. falls in its industry
5,345 Cable splicing, electrical or establishmentsSafer than 26% of graded establishments in this industry, whose median TCR is 2.0.
Narrower to Michigan alone (the establishments it most directly competes with for workers and contracts): ranked #114 safest of 151 Cable splicing, electrical or employers in Michigan.
Trend analysis for Quad Electronics, Inc.
Between 2020 and 2021, Quad Electronics, Inc.'s Total Case Rate worsened from 1.6 to 6.4 recordable injuries per 100 full-time workers, a 292% increase across 1 year of OSHA reporting.
The safest year on record was 2020, at a TCR of 1.6, while 2021 saw the highest rate, at 6.4, a spread of 4.8 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 2 reporting years, Quad Electronics, Inc. recorded 3 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 12 injuries, 6 illnesses shown on this page for Quad Electronics, Inc. are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 238210 - Cable splicing, electrical or fiber optic.
DART Rate, Transparent Calculation (2021)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
6 DART incidents × 200,000 ÷ 219,066 hours worked = 5.48 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Quad Electronics, Inc. (this establishment) | 4.01 | OSHA ITA Form 300A, 3-year avg |
| Electrical contractors industry avg | 2.80 | BLS IIF, NAICS 238210 |
| Michigan state avg (all industries) | 4.73 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Quad Electronics, Inc. to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2021: 7 reportable incidents · 1 injuries, 6 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 9 reportable incidents · 9 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2021 | 6.4 | 5.5 | 1 | 6 | 0 |
| 2020 | 1.6 | 0.8 | 2 | 0 | 0 |
| 2018 | 1952.3 | 216.9 | 9 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Quad Electronics, Inc.'s reported OSHA injury record versus its Cable splicing, electrical or fiber optic peers, not a verdict on whether any single site is safe today.
- At 143% of the Cable splicing, electrical or fiber optic benchmark, Quad Electronics, Inc. reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Cable splicing, electrical or fiber optic sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Quad Electronics, Inc.'s safety grade?
How many injuries has Quad Electronics, Inc. reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Michigan, and by nearby establishments in Troy - a different peer set than the category browse links below.
Similar TCR (~4.0)
Similar size (~116 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.