CARPENTRY - CABINETS AND TRIM · Florida
Quality Cabinets Counters, Inc.
Fort Myers, FL · ~34 workers · 6 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 10.2
- Avg TCR
- 2.8
- Industry avg
- 0
- Fatalities
The verdict
Quality Cabinets Counters, Inc. runs at 365% of its industry's injury rate - far more dangerous than the typical CARPENTRY - CABINETS AND TRIM workplace, earning a grade F.
- F
- Failing Safety Record
- 10.2
- avg TCR · per 100 workers
- 2.8
- industry benchmark (BLS)
- 18
- recordable injuries tracked
Grade compares Quality Cabinets Counters, Inc.'s OSHA Total Case Rate of 10.2 to the CARPENTRY - CABINETS AND TRIM BLS benchmark of 2.8 (365% of benchmark) across 6 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
Quality Cabinets Counters, Inc.'s yearly Total Case Rate, against the 2.8 industry benchmark.
Where Quality Cabinets Counters, Inc. falls in its industry
409 CARPENTRY - CABINETS AND TRIM establishmentsSafer than 13% of graded establishments in this industry, whose median TCR is 4.3.
Narrower to Florida alone (the establishments it most directly competes with for workers and contracts): ranked #35 safest of 42 CARPENTRY - CABINETS AND TRIM employers in Florida.
Quality Cabinets Counters, Inc. has an average TCR of 10.2, which is 365% of the industry average (2.8) for CARPENTRY - CABINETS AND TRIM. This is significantly worse than average.
The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.
Trend analysis for Quality Cabinets Counters, Inc.
Between 2019 and 2024, Quality Cabinets Counters, Inc.'s Total Case Rate held roughly steady from 0.0 to 9.5 recordable injuries per 100 full-time workers, a 0% change across 5 years of OSHA reporting.
The safest year on record was 2019, at a TCR of 0.0, while 2020 saw the highest rate, at 23.5, a spread of 23.5 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 6 reporting years, Quality Cabinets Counters, Inc. recorded 18 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 6-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 18 injuries shown on this page for Quality Cabinets Counters, Inc. are sourced from its own 6 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 238350 - CARPENTRY - CABINETS AND TRIM.
DART Rate, Transparent Calculation (2024)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
2 DART incidents × 200,000 ÷ 63,183 hours worked = 6.33 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Quality Cabinets Counters, Inc. (this establishment) | 10.23 | OSHA ITA Form 300A, 6-year avg |
| Finish carpentry industry avg | 2.80 | BLS IIF, NAICS 238350 |
| Florida state avg (all industries) | 4.57 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Quality Cabinets Counters, Inc. to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 5 reportable incidents · 5 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 9.5 | 6.3 | 3 | 0 | 0 |
| 2023 | 5.1 | 2.6 | 2 | 0 | 0 |
| 2022 | 6.7 | 3.4 | 2 | 0 | 0 |
| 2021 | 16.5 | 16.5 | 5 | 0 | 0 |
| 2020 | 23.5 | 15.6 | 6 | 0 | 0 |
| 2019 | 0.0 | 0.0 | 0 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Quality Cabinets Counters, Inc.'s reported OSHA injury record versus its CARPENTRY - CABINETS AND TRIM peers, not a verdict on whether any single site is safe today.
- At 365% of the CARPENTRY - CABINETS AND TRIM benchmark, Quality Cabinets Counters, Inc. reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider CARPENTRY - CABINETS AND TRIM sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Quality Cabinets Counters, Inc.'s safety grade?
How many injuries has Quality Cabinets Counters, Inc. reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Florida, and by nearby establishments in Fort Myers - a different peer set than the category browse links below.
Similar TCR (~10.2)
Similar size (~34 workers)
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.
Related
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.