Cabinets, wood built-in, constructed on site · Utah
Rasmussen Custom Cabinetry
Willard, UT · ~55 workers · 2 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 0.0
- Avg TCR
- 2.8
- Industry avg
- 0
- Fatalities
The verdict
Rasmussen Custom Cabinetry runs at 0% of its industry's injury rate - about level with the typical Cabinets, wood built-in, constructed on site workplace, earning a grade C.
- C
- Average Safety Record
- 0.0
- avg TCR · per 100 workers
- 2.8
- industry benchmark (BLS)
- 0
- recordable injuries tracked
Grade compares Rasmussen Custom Cabinetry's OSHA Total Case Rate of 0.0 to the Cabinets, wood built-in, constructed on site BLS benchmark of 2.8 (0% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Rasmussen Custom Cabinetry's yearly Total Case Rate, against the 2.8 industry benchmark.
Where Rasmussen Custom Cabinetry falls in its industry
409 Cabinets, wood built-in, const establishmentsSafer than 90% of graded establishments in this industry, whose median TCR is 4.3.
Narrower to Utah alone (the establishments it most directly competes with for workers and contracts): ranked #2 safest of 10 Cabinets, wood built-in, const employers in Utah.
Trend analysis for Rasmussen Custom Cabinetry
Between 2021 and 2022, Rasmussen Custom Cabinetry's Total Case Rate held roughly steady from 0.0 to 0.0 recordable injuries per 100 full-time workers, a 0% change across 1 year of OSHA reporting.
The safest year on record was 2021, at a TCR of 0.0, while 2021 saw the highest rate, at 0.0, a spread of 0.0 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, Rasmussen Custom Cabinetry recorded 0 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 0 injuries shown on this page for Rasmussen Custom Cabinetry are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 238350 - Cabinets, wood built-in, constructed on site.
DART Rate, Transparent Calculation (2022)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 96,084 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Rasmussen Custom Cabinetry (this establishment) | 0.00 | OSHA ITA Form 300A, 2-year avg |
| Finish carpentry industry avg | 2.80 | BLS IIF, NAICS 238350 |
| Utah state avg (all industries) | 4.77 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Rasmussen Custom Cabinetry to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2022: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2022 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Rasmussen Custom Cabinetry's reported OSHA injury record, strong versus its Cabinets, wood built-in, constructed on site peers, but not a guarantee about any single site today.
- At 0% of the Cabinets, wood built-in, constructed on site benchmark, Rasmussen Custom Cabinetry reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Cabinets, wood built-in, constructed on site sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Rasmussen Custom Cabinetry's safety grade?
How many injuries has Rasmussen Custom Cabinetry reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Utah, and by nearby establishments in Willard - a different peer set than the category browse links below.
Similar TCR (~0.0)
Similar size (~55 workers)
Nearby in Willard
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.