Precision turned product manufacturing · New York
Rotadyne Engineered Products Division
Spencerport, NY · ~36 workers · 2 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 0.0
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Rotadyne Engineered Products Division runs at 0% of its industry's injury rate - about level with the typical Precision turned product manufacturing workplace, earning a grade C.
- C
- Average Safety Record
- 0.0
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 0
- recordable injuries tracked
Grade compares Rotadyne Engineered Products Division's OSHA Total Case Rate of 0.0 to the Precision turned product manufacturing BLS benchmark of 3.3 (0% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Rotadyne Engineered Products Division's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Rotadyne Engineered Products Division falls in its industry
513 Precision turned product manuf establishmentsSafer than 91% of graded establishments in this industry, whose median TCR is 3.3.
Narrower to New York alone (the establishments it most directly competes with for workers and contracts): ranked #3 safest of 34 Precision turned product manuf employers in New York.
Trend analysis for Rotadyne Engineered Products Division
Between 2016 and 2017, Rotadyne Engineered Products Division's Total Case Rate held roughly steady from 0.0 to 0.0 recordable injuries per 100 full-time workers, a 0% change across 1 year of OSHA reporting.
The safest year on record was 2016, at a TCR of 0.0, while 2016 saw the highest rate, at 0.0, a spread of 0.0 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, Rotadyne Engineered Products Division recorded 0 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 0 injuries shown on this page for Rotadyne Engineered Products Division are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332721 - Precision turned product manufacturing.
DART Rate, Transparent Calculation (2017)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 74,884 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Rotadyne Engineered Products Division (this establishment) | 0.00 | OSHA ITA Form 300A, 2-year avg |
| Precision turned product manufacturing industry avg | 3.30 | BLS IIF, NAICS 332721 |
| New York state avg (all industries) | 4.67 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Rotadyne Engineered Products Division to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2017: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2017 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2016 | 0.0 | 0.0 | 0 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Rotadyne Engineered Products Division's reported OSHA injury record, strong versus its Precision turned product manufacturing peers, but not a guarantee about any single site today.
- At 0% of the Precision turned product manufacturing benchmark, Rotadyne Engineered Products Division reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Precision turned product manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Rotadyne Engineered Products Division's safety grade?
How many injuries has Rotadyne Engineered Products Division reported?
Similar Employers
Matched by safety record across the industry, by workforce size within New York, and by nearby establishments in Spencerport - a different peer set than the category browse links below.
Similar TCR (~0.0)
Similar size (~36 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.