Manufacturing Wood Products · Colorado
Schacht Spindle Company Inc
Boulder, CO · ~46 workers · 4 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 14.3
- Avg TCR
- 2.8
- Industry avg
- 0
- Fatalities
The verdict
Schacht Spindle Company Inc runs at 511% of its industry's injury rate - far more dangerous than the typical Manufacturing Wood Products workplace, earning a grade F.
- F
- Failing Safety Record
- 14.3
- avg TCR · per 100 workers
- 2.8
- industry benchmark (BLS)
- 26
- recordable injuries tracked
Grade compares Schacht Spindle Company Inc's OSHA Total Case Rate of 14.3 to the Manufacturing Wood Products BLS benchmark of 2.8 (511% of benchmark) across 4 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Schacht Spindle Company Inc's yearly Total Case Rate, against the 2.8 industry benchmark.
Where Schacht Spindle Company Inc falls in its industry
409 Manufacturing Wood Products establishmentsSafer than 6% of graded establishments in this industry, whose median TCR is 4.3.
Narrower to Colorado alone (the establishments it most directly competes with for workers and contracts): ranked #12 safest of 12 Manufacturing Wood Products employers in Colorado.
Trend analysis for Schacht Spindle Company Inc
Between 2022 and 2024, Schacht Spindle Company Inc's Total Case Rate held roughly steady from 15.3 to 14.9 recordable injuries per 100 full-time workers, a 3% decrease across 2 years of OSHA reporting.
The safest year on record was 2023, at a TCR of 12.8, while 2022 saw the highest rate, at 15.3, a spread of 2.6 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 3 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 3 reporting years, Schacht Spindle Company Inc recorded 20 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 26 injuries shown on this page for Schacht Spindle Company Inc are sourced from its own 4 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 238350 - Manufacturing Wood Products.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
5 DART incidents × 200,000 ÷ 94,107 hours worked = 10.63 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Schacht Spindle Company Inc (this establishment) | 14.32 | OSHA ITA Form 300A, 4-year avg |
| Finish carpentry industry avg | 2.80 | BLS IIF, NAICS 238350 |
| Colorado state avg (all industries) | 5.41 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Schacht Spindle Company Inc to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 7 reportable incidents · 7 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 7 reportable incidents · 7 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 14.9 | 10.6 | 7 | 0 | 0 |
| 2023 | 12.8 | 6.4 | 6 | 0 | 0 |
| 2022 | 15.3 | 6.6 | 7 | 0 | 0 |
| 2020 | 23076.9 | 7692.3 | 6 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Schacht Spindle Company Inc's reported OSHA injury record versus its Manufacturing Wood Products peers, not a verdict on whether any single site is safe today.
- At 511% of the Manufacturing Wood Products benchmark, Schacht Spindle Company Inc reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Manufacturing Wood Products sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Schacht Spindle Company Inc's safety grade?
How many injuries has Schacht Spindle Company Inc reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Colorado, and by nearby establishments in Boulder - a different peer set than the category browse links below.
Similar TCR (~14.3)
Similar size (~46 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.