Cold forgings made from purchased iron or steel, unfinished · Michigan
Shannon Precision Fastener - Auburn Hills
Auburn Hills, MI · ~82 workers · 9 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 6.5
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Shannon Precision Fastener - Auburn Hills runs at 198% of its industry's injury rate - more dangerous than the typical Cold forgings made from purchased iron or steel, unfinished workplace, earning a grade D.
Shannon Precision Fastener - Auburn Hills: 6.5 TCR = 198% of Cold forgings made from purchased iron or steel, unfinished BLS 3.3 · 9y Form 300A (see methodology below)
Shannon Precision Fastener - Auburn Hills safety composite
Shannon Precision Fastener - Auburn Hills scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on total case rate (tcr) (safer than 34%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
39/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 6.53 per 100 workers
Safer than 34% of industry peers
- DART rate
- D 3.49 per 100 workers
Safer than 35% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−6.7
2016→2024
Shannon Precision Fastener - Auburn Hills injury rate improved
Shannon Precision Fastener - Auburn Hills's TCR fell 6.7 from 11.0 in 2016 to 4.4 in 2024. Peak filing year was 2017 at 14.5 TCR. In 2024, DART was 0.53× this establishment's average TCR (severity share of cases).
2016=11.0 · 2017=14.5 · 2018=5.0 · 2019=6.0 · 2020=4.9 · 2021=4.1 · 2022=5.0 · 2023=3.8 · 2024=4.4
OSHA ITA Form 300A scorecard
Establishment book 332111 · Auburn Hills, MI ABOVE-IND · SMALL
Grade D · TCR 6.5 · 198% of ind
- DART 3.5 DART
- RANK #16/21
- PHOTO LTC ROLL & ENGINEERING
- BOOK 9y book
- INJ 51 inj
- SIZE ~82 FTE
Nearest TCR peer: LTC ROLL & ENGINEERING (0.0 TCR gap)
Read with this employer → · Industry book → · Michigan employers → · Look up another →
Shannon Precision Fastener - Auburn Hills in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- ATI Forged Pro
ATI Forged Products
6.6 TCR
- Western Forge
Western Forge & Flange Company, LLC.
6.6 TCR
- SIFCO Industri
SIFCO Industries, Inc.
6.6 TCR
- This site
Shannon Precision Fastener - Auburn Hills
6.5 TCR
- LTC ROLL & ENG
LTC ROLL & ENGINEERING
6.5 TCR
What this shows Shannon Precision Fastener - Auburn Hills averages 6.5 TCR (198% of the Cold forgings made from purchased iron or steel, unfinished BLS benchmark).
Shannon Precision Fastener - Auburn Hills TCR series: 2016=11 · 2017=14.5 · 2018=5 · 2019=6 · 2020=4.9 · 2021=4.1 · 2022=5 · 2023=3.8 · 2024=4.4 · BLS 3.3
Where Shannon Precision Fastener - Auburn Hills falls in its industry
241 Cold forgings made from purcha establishmentsSafer than 34% of graded establishments in this industry, whose median TCR is 5.0.
Narrower to Michigan alone (the establishments it most directly competes with for workers and contracts): ranked #16 safest of 21 Cold forgings made from purcha employers in Michigan.
Shannon Precision Fastener - Auburn Hills has fewer employees than the Cold forgings made from purchased iron o median and a higher injury rate than the industry's median TCR of 5.0. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 4.4 | 3.5 | 5 | 0 | 0 |
| 2023 | 3.8 | 2.3 | 5 | 0 | 0 |
| 2022 | 5.0 | 4.2 | 6 | 0 | 0 |
| 2021 | 4.1 | 4.1 | 4 | 0 | 0 |
| 2020 | 4.9 | 4.9 | 4 | 0 | 0 |
| 2019 | 6.0 | 6.0 | 5 | 1 | 0 |
| 2018 | 5.0 | 3.0 | 5 | 0 | 0 |
| 2017 | 14.5 | 14.5 | 11 | 0 | 0 |
| 2016 | 11.0 | 11.0 | 6 | 1 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332111 · MI · Auburn Hills
241 Cold forgings made from purchased iron or steel, unfinished employers nationwide with a credible TCR · 16,393 rated employers in Michigan with headcount on file · 215 employers in Auburn Hills, MI · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | LTC ROLL & ENGINEERING | 6.5 TCR |
| NAICS-TCR | ATI Forged Products | 6.6 TCR |
| NAICS-TCR | Western Forge & Flange Company, LLC. | 6.6 TCR |
| NAICS-TCR | SIFCO Industries, Inc. | 6.6 TCR |
| STATE-SIZE | Riveridge Packing | 82 FTE |
| STATE-SIZE | Marysville Service Center | 82 FTE |
| STATE-SIZE | Construction | 82 FTE |
| STATE-SIZE | The Christman Company - Detroit | 82 FTE |
| CITY-NEAR | FCA US Headquarters and Technology Center | 14,088 FTE |
| CITY-NEAR | FCA US Headquarters and Technology | 12,609 FTE |
| CITY-NEAR | Continental - Auburn Hills North | 1,318 FTE |
| CITY-NEAR | CTC Pilot Plant | 1,094 FTE |
| NAT-TCR | UMC Sunset QC/PC | 6.5 TCR |
| NAT-TCR | Howard Industries Inc (Transformer) | 6.5 TCR |
| NAT-TCR | Peconic Bay Medical Center | 6.5 TCR |
| NAT-TCR | Ephrata Store | 6.5 TCR |
| NAT-SIZE | Ridge Manor | 82 FTE |
| NAT-SIZE | Pyles Plumbing and Utility Contractors Inc | 82 FTE |
| NAT-SIZE | ILN Air Transport Service Group (ATSG) | 82 FTE |
| NAT-SIZE | ESAPCO | 82 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.