Metal scrap and waste merchant wholesalers · Texas
Sims Limited Houston Japhet
Houston, TX · ~75 workers · 2 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 0.0
- Avg TCR
- 2.2
- Industry avg
- 0
- Fatalities
The verdict
Sims Limited Houston Japhet runs at 0% of its industry's injury rate - about level with the typical Metal scrap and waste merchant wholesalers workplace, earning a grade C.
- C
- Average Safety Record
- 0.0
- avg TCR · per 100 workers
- 2.2
- industry benchmark (BLS)
- 0
- recordable injuries tracked
Grade compares Sims Limited Houston Japhet's OSHA Total Case Rate of 0.0 to the Metal scrap and waste merchant wholesalers BLS benchmark of 2.2 (0% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Sims Limited Houston Japhet's yearly Total Case Rate, against the 2.2 industry benchmark.
Where Sims Limited Houston Japhet falls in its industry
1,247 Metal scrap and waste merchant establishmentsSafer than 90% of graded establishments in this industry, whose median TCR is 3.4.
Narrower to Texas alone (the establishments it most directly competes with for workers and contracts): ranked #3 safest of 110 Metal scrap and waste merchant employers in Texas.
Trend analysis for Sims Limited Houston Japhet
Between 2023 and 2024, Sims Limited Houston Japhet's Total Case Rate held roughly steady from 0.0 to 0.0 recordable injuries per 100 full-time workers, a 0% change across 1 year of OSHA reporting.
The safest year on record was 2023, at a TCR of 0.0, while 2023 saw the highest rate, at 0.0, a spread of 0.0 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, Sims Limited Houston Japhet recorded 0 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 0 injuries shown on this page for Sims Limited Houston Japhet are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 423930 - Metal scrap and waste merchant wholesalers.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 170,101 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Sims Limited Houston Japhet (this establishment) | 0.00 | OSHA ITA Form 300A, 2-year avg |
| Metal scrap and waste merchant wholesalers industry avg | 2.20 | BLS IIF, NAICS 423930 |
| Texas state avg (all industries) | 3.73 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Sims Limited Houston Japhet to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Sims Limited Houston Japhet's reported OSHA injury record, strong versus its Metal scrap and waste merchant wholesalers peers, but not a guarantee about any single site today.
- At 0% of the Metal scrap and waste merchant wholesalers benchmark, Sims Limited Houston Japhet reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Metal scrap and waste merchant wholesalers sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Sims Limited Houston Japhet's safety grade?
How many injuries has Sims Limited Houston Japhet reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Texas, and by nearby establishments in Houston - a different peer set than the category browse links below.
Similar TCR (~0.0)
Similar size (~75 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.