Countertops, stone, manufacturing · Ohio

Solid Surfaces Plus

Cleveland, OH · ~19 workers · 6 years of OSHA Injury Tracking Application data.

B
Good Safety Record
1.7
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

Solid Surfaces Plus runs at 50% of its industry's injury rate - safer than the typical Countertops, stone, manufacturing workplace, earning a grade B.

B
Good Safety Record
1.7
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
2
recordable injuries tracked

Grade compares Solid Surfaces Plus's OSHA Total Case Rate to the BLS industry benchmark across 6 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.

Injury rate over time

Solid Surfaces Plus's yearly Total Case Rate, against the 3.3 industry benchmark.

-20246 201620172018201920202022 03.3 Industry benchmarkSolid Surfaces Plus TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 327991.

Where Solid Surfaces Plus falls in its industry

333 Countertops, stone, manufactur establishments

Safer than 87% of graded establishments in this industry, whose median TCR is 5.0.

More dangerous than peersSafer than peers

Narrower to Ohio alone (the establishments it most directly competes with for workers and contracts): ranked #3 safest of 24 Countertops, stone, manufactur employers in Ohio.

Solid Surfaces Plus has an average TCR of 1.7, which is 50% of the industry average (3.3) for Countertops, stone, manufacturing. This is better than average.

The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.

Safety Insights for Solid Surfaces Plus

Solid Surfaces Plus operates an establishment with approximately 19 full-time equivalent workers in Cleveland, OH, classified under the Countertops, stone, manufacturing industry (NAICS 327991). Across 6 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 2 recordable injuries, 0 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 1.7 injuries per 100 full-time workers per year provides the anchor metric for the B letter grade (Good Safety Record).

Benchmarked against the Bureau of Labor Statistics industry average of 3.3 for Countertops, stone, manufacturing, Solid Surfaces Plus's workforce experiences 50% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked, a 200,000-hour exposure base equals roughly 100 full-time workers, so establishments with very different headcounts can be compared directly. A TCR below the benchmark signals that controls, training, or automation may be outperforming peers.

Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 6 reporting cycles points to systemic hazard exposure. Readers evaluating Solid Surfaces Plus as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries, there is no modeling, estimation, or third-party adjustment layered on top of the government data.

Verify This Employer with OSHA

All injury, illness, and fatality figures on this page are sourced from Solid Surfaces Plus's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 327991 - Countertops, stone, manufacturing.

DART Rate, Transparent Calculation (2022)

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

0 DART incidents × 200,000 ÷ 19,021 hours worked = 0.00 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Solid Surfaces Plus (this establishment) 1.66 OSHA ITA Form 300A, 6-year avg
Countertops, stone, manufacturing industry avg 3.30 BLS IIF, NAICS 327991
Ohio state avg (all industries) 3.90 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Solid Surfaces Plus to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2022 0.0 0.0 0 0 0
2020 0.0 0.0 0 0 0
2019 0.0 0.0 0 0 0
2018 0.0 0.0 0 0 0
2017 5.3 5.3 1 0 0
2016 4.7 0.0 1 0 0

What this grade means for you

Use this grade as a relative read on Solid Surfaces Plus's reported OSHA injury record, strong versus its Countertops, stone, manufacturing peers, but not a guarantee about any single site today.

  • At 50% of the Countertops, stone, manufacturing benchmark, Solid Surfaces Plus reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
  • Judge this record against the wider Countertops, stone, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Solid Surfaces Plus's safety grade?
Solid Surfaces Plus has a safety grade of B (Good Safety Record). This grade is based on their average Total Case Rate (TCR) of 1.7 compared to the BLS industry benchmark of 3.3 for Countertops, stone, manufacturing.
How is the safety grade calculated?
Safety grades are calculated by comparing an employer's average Total Case Rate (TCR) - the number of workplace injuries and illnesses per 100 full-time workers per year, against the Bureau of Labor Statistics (BLS) industry benchmark. Grade A means significantly below average injury rates; grade F means significantly above average.
How many injuries has Solid Surfaces Plus reported?
Solid Surfaces Plus has reported 2 total injuries and 0 fatalities across 6 years of OSHA data (2022, 2020, 2019, 2018, 2017, 2016). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.
Where does PlainSafetyScore get its data?
All safety data comes from OSHA's Injury Tracking Application (ITA), which collects mandatory establishment-level injury and illness reports from employers with 250+ employees or those in high-hazard industries. Industry benchmarks are from the Bureau of Labor Statistics (BLS) Injuries, Illnesses, and Fatalities (IIF) program.

Explore More Safety Data

→ More employers in Ohio → Industry: Countertops, stone, manufacturing → Safety grades explained → How to check employer safety → Understanding OSHA rates
Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2022, 2020, 2019, 2018, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Related

All employers → | Rankings →
Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.