Anodizing metals and metal products for the trade · New York

Surface Finish Technologies, Inc

Elmira, NY · ~44 workers · 9 years of OSHA Injury Tracking Application data.

B
Good Safety Record
2.2
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Surface Finish Technologies, Inc runs at 68% of its industry's injury rate - safer than the typical Anodizing metals and metal products for the trade workplace, earning a grade B.

Surface Finish Technologies, Inc: 2.2 TCR = 68% of Anodizing metals and metal products for the trade BLS 3.3 · 9y Form 300A (see methodology below)

Surface Finish Technologies, Inc safety composite

Surface Finish Technologies, Inc scores strongest on dart rate (safer than 82% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

71/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
C 2.23 per 100 workers

Safer than 73% of industry peers

DART rate
B 0 per 100 workers

Safer than 82% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

TCR Δ

−2.1

2016→2024

Surface Finish Technologies, Inc injury rate improved

Surface Finish Technologies, Inc's TCR fell 2.1 from 2.1 in 2016 to 0.0 in 2024. Peak filing year was 2020 at 9.1 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).

2016=2.1 · 2017=2.1 · 2018=0.0 · 2019=4.2 · 2020=9.1 · 2021=2.5 · 2022=0.0 · 2023=0.0 · 2024=0.0

OSHA ITA Form 300A scorecard

Establishment book 332813 · Elmira, NY AT/BELOW-IND · SMALL

Grade B · TCR 2.2 · 68% of ind

  • DART 0.0 DART
  • RANK #7/16
  • PHOTO Nobert Plating Co
  • BOOK 9y book
  • INJ 9 inj
  • SIZE ~44 FTE

Nearest TCR peer: Nobert Plating Co (0.0 TCR gap)

Read with this employer → · Industry book → · New York employers → · Look up another →

Surface Finish Technologies, Inc in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Surface Finish Technologies, Inc averages 2.2 TCR (68% of the Anodizing metals and metal products for the trade BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Surface Finish Technologies, Inc TCR series: 2016=2.1 · 2017=2.1 · 2018=0 · 2019=4.2 · 2020=9.1 · 2021=2.5 · 2022=0 · 2023=0 · 2024=0 · BLS 3.3

Where Surface Finish Technologies, Inc falls in its industry

585 Anodizing metals and metal pro establishments

Safer than 73% of graded establishments in this industry, whose median TCR is 4.0.

More dangerous than peersSafer than peers

Narrower to New York alone (the establishments it most directly competes with for workers and contracts): ranked #7 safest of 16 Anodizing metals and metal pro employers in New York.

Surface Finish Technologies, Inc (44 employees, TCR 2.2) among 29 same-industry peers, split at the industry median of 56 employees and a TCR of 4.0 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0200400600 05101520 Average employees Total Case Rate Surface Finish Technologies, Inc
Surface Finish Technologies, Inc (44 employees, TCR 2.2) among 29 same-industry peers, split at the industry median of 56 employees and a TCR of 4.0

Surface Finish Technologies, Inc has fewer employees than the Anodizing metals and metal products for median and a lower injury rate than the industry's median TCR of 4.0. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 0.0 0.0 0 0 0
2023 0.0 0.0 0 0 0
2022 0.0 0.0 0 0 0
2021 2.5 2.5 1 0 0
2020 9.1 9.1 4 0 0
2019 4.2 4.2 2 0 0
2018 0.0 0.0 0 0 0
2017 2.1 2.1 1 0 0
2016 2.1 0.0 1 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332813 · NY · Elmira

585 Anodizing metals and metal products for the trade employers nationwide with a credible TCR · 21,008 rated employers in New York with headcount on file · 88 employers in Elmira, NY · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Nobert Plating Co 2.2 TCR
NAICS-TCR Frontier Group Chino Valley 2.2 TCR
NAICS-TCR Result Enterprises Inc, DBA High Tech Finishing 2.2 TCR
NAICS-TCR Toledo 2.2 TCR
STATE-SIZE Fillmore Greenhouses 44 FTE
STATE-SIZE MARQUART BROS, LLC 44 FTE
STATE-SIZE Woodcrest Dairy LLC 44 FTE
STATE-SIZE NYSEG Lockport 44 FTE
CITY-NEAR Arnot Ogden Medical Center 2,497 FTE
CITY-NEAR The Arc of Chemung-Schuyler 556 FTE
CITY-NEAR St. Joseph's Hospital 424 FTE
CITY-NEAR DePuy Synthes Horseheads 388 FTE
NAT-TCR Cardinal Machine Company 2.2 TCR
NAT-TCR Brenham 2.2 TCR
NAT-TCR Core Carrier Corporation 2.2 TCR
NAT-TCR Transtar Autobody Technologies 2.2 TCR
NAT-SIZE 490-Sacramento 44 FTE
NAT-SIZE Rochester City Delivery 44 FTE
NAT-SIZE Capco Steel, Inc. 44 FTE
NAT-SIZE EnerSys Romeoville 44 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.