Cutting dies, metalworking, manufacturing · Pennsylvania

Syst-A-Matic Tool & Design Inc.

Meadville, PA · ~19 workers · 6 years of OSHA Injury Tracking Application data.

D
Poor Safety Record
4.6
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Syst-A-Matic Tool & Design Inc. runs at 141% of its industry's injury rate - more dangerous than the typical Cutting dies, metalworking, manufacturing workplace, earning a grade D.

Syst-A-Matic Tool & Design Inc.: 4.6 TCR = 141% of Cutting dies, metalworking, manufacturing BLS 3.3 · 6y Form 300A (see methodology below)

Syst-A-Matic Tool & Design Inc. safety composite

Syst-A-Matic Tool & Design Inc. scores strongest on dart rate (safer than 74% of same-industry peers) and weakest on total case rate (tcr) (safer than 32%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

D

51/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
F 4.64 per 100 workers

Safer than 32% of industry peers

DART rate
C 0 per 100 workers

Safer than 74% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

TCR Δ

−10.0

2019→2024

Syst-A-Matic Tool & Design Inc. injury rate improved

Syst-A-Matic Tool & Design Inc.'s TCR fell 10.0 from 10.0 in 2019 to 0.0 in 2024. Peak filing year was 2020 at 17.8 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).

2019=10.0 · 2020=17.8 · 2021=0.0 · 2022=0.0 · 2023=0.0 · 2024=0.0

OSHA ITA Form 300A scorecard

Establishment book 333514 · Meadville, PA ABOVE-IND · SMALL

Grade D · TCR 4.6 · 141% of ind

  • DART 0.0 DART
  • RANK #30/39
  • PHOTO Met-L-Tec LLC
  • BOOK 6y book
  • INJ 3 inj
  • SIZE ~19 FTE

Nearest TCR peer: Met-L-Tec LLC (0.0 TCR gap)

Read with this employer → · Industry book → · Pennsylvania employers → · Look up another →

Syst-A-Matic Tool & Design Inc. in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Syst-A-Matic Tool & Design Inc. averages 4.6 TCR (141% of the Cutting dies, metalworking, manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Syst-A-Matic Tool & Design Inc. TCR series: 2019=10 · 2020=17.8 · 2021=0 · 2022=0 · 2023=0 · 2024=0 · BLS 3.3

Where Syst-A-Matic Tool & Design Inc. falls in its industry

387 Cutting dies, metalworking, ma establishments

Safer than 32% of graded establishments in this industry, whose median TCR is 3.4.

More dangerous than peersSafer than peers

Narrower to Pennsylvania alone (the establishments it most directly competes with for workers and contracts): ranked #30 safest of 39 Cutting dies, metalworking, ma employers in Pennsylvania.

Syst-A-Matic Tool & Design Inc. (19 employees, TCR 4.6) among 29 same-industry peers, split at the industry median of 56 employees and a TCR of 3.4 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0100200300400500 051015 Average employees Total Case Rate Syst-A-Matic Tool & Design Inc.
Syst-A-Matic Tool & Design Inc. (19 employees, TCR 4.6) among 29 same-industry peers, split at the industry median of 56 employees and a TCR of 3.4

Syst-A-Matic Tool & Design Inc. has fewer employees than the Cutting dies, metalworking, manufacturin median and a higher injury rate than the industry's median TCR of 3.4. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 0.0 0.0 0 0 0
2023 0.0 0.0 0 0 0
2022 0.0 0.0 0 0 0
2021 0.0 0.0 0 0 0
2020 17.8 11.9 1 2 0
2019 10.0 0.0 2 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

333514 · PA · Meadville

387 Cutting dies, metalworking, manufacturing employers nationwide with a credible TCR · 22,692 rated employers in Pennsylvania with headcount on file · 107 employers in Meadville, PA · 4 cross-state NAT-TCR peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Met-L-Tec LLC 4.6 TCR
NAICS-TCR Form G Tech Co. 4.7 TCR
NAICS-TCR Smith Brothers Tool 4.6 TCR
NAICS-TCR Visioneering, Inc - Auburn Hills 4.7 TCR
STATE-SIZE Kennett Square Mushroom Operation, LLC 19 FTE
STATE-SIZE Sullivan 19 FTE
STATE-SIZE Williamsport Office 19 FTE
STATE-SIZE 473-NiSource-PA Central Horning Rd MOD 19 FTE
CITY-NEAR Meadville Medical Center- Liberty 939 FTE
CITY-NEAR MEADVILLE 508 FTE
CITY-NEAR The Arc of Crawford County Inc 471 FTE
CITY-NEAR Meadville Operations 458 FTE
NAT-TCR South Beloit 4.6 TCR
NAT-TCR Cardinal Health - MD - Chandler, AZ 4.6 TCR
NAT-TCR Runnings of Canandaigua 4.6 TCR
NAT-TCR DiNatale Construction, Inc. 4.6 TCR

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.