Jigs and fixtures for use with machine tools manufacturing · Michigan
Visioneering, Inc - Auburn Hills
Auburn Hills, MI · ~229 workers · 9 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.7
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Visioneering, Inc - Auburn Hills runs at 142% of its industry's injury rate - more dangerous than the typical Jigs and fixtures for use with machine tools manufacturing workplace, earning a grade D.
Visioneering, Inc - Auburn Hills: 4.7 TCR = 142% of Jigs and fixtures for use with machine tools manufacturing BLS 3.3 · 9y Form 300A (see methodology below)
Visioneering, Inc - Auburn Hills safety composite
Visioneering, Inc - Auburn Hills scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on dart rate (safer than 7%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
28/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 4.7 per 100 workers
Safer than 32% of industry peers
- DART rate
- F 5.51 per 100 workers
Safer than 7% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Visioneering, Inc - Auburn Hills: 5.8 → 7.5 TCR
Peak year 2024 @ 7.5 TCR · DART/TCR 1.17× in 2024
Visioneering, Inc - Auburn Hills's TCR rose 1.7 from 5.8 in 2016 to 7.5 in 2024. In 2024, DART was 1.17× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 333514 · Auburn Hills, MI ABOVE-IND · MID
Grade D · TCR 4.7 · 142% of ind
- DART 5.5 DART
- RANK #81/131
- PHOTO IFABM
- BOOK 9y book
- INJ 114 inj
- SIZE ~229 FTE
Nearest TCR peer: IFABM (0.0 TCR gap)
Read with this employer → · Industry book → · Michigan employers → · Look up another →
Visioneering, Inc - Auburn Hills in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Visioneering, Inc - Auburn Hills
4.7 TCR
- IFABM
IFABM
4.7 TCR
- DT&D
DT&D
4.7 TCR
- Form G Tech Co
Form G Tech Co.
4.7 TCR
- Syst-A-Matic T
Syst-A-Matic Tool & Design Inc.
4.6 TCR
What this shows Visioneering, Inc - Auburn Hills averages 4.7 TCR (142% of the Jigs and fixtures for use with machine tools manufacturing BLS benchmark).
Visioneering, Inc - Auburn Hills TCR series: 2016=5.8 · 2017=5.4 · 2018=3.8 · 2019=4.2 · 2020=3 · 2021=3.1 · 2022=5.6 · 2023=3.9 · 2024=7.5 · BLS 3.3
Where Visioneering, Inc - Auburn Hills falls in its industry
387 Jigs and fixtures for use with establishmentsSafer than 32% of graded establishments in this industry, whose median TCR is 3.4.
Narrower to Michigan alone (the establishments it most directly competes with for workers and contracts): ranked #81 safest of 131 Jigs and fixtures for use with employers in Michigan.
Visioneering, Inc - Auburn Hills has more employees than the Jigs and fixtures for use with machine t median and a higher injury rate than the industry's median TCR of 3.4. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 7.5 | 5.5 | 26 | 0 | 0 |
| 2023 | 3.9 | 2.6 | 12 | 0 | 0 |
| 2022 | 5.6 | 3.4 | 14 | 1 | 0 |
| 2021 | 3.1 | 3.1 | 7 | 0 | 0 |
| 2020 | 3.0 | 1.3 | 7 | 0 | 0 |
| 2019 | 4.2 | 2.9 | 13 | 0 | 0 |
| 2018 | 3.8 | 1.6 | 7 | 0 | 0 |
| 2017 | 5.4 | 2.7 | 15 | 1 | 0 |
| 2016 | 5.8 | 4.5 | 13 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
333514 · MI · Auburn Hills
387 Jigs and fixtures for use with machine tools manufacturing employers nationwide with a credible TCR · 16,393 rated employers in Michigan with headcount on file · 215 employers in Auburn Hills, MI · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | IFABM | 4.7 TCR |
| NAICS-TCR | DT&D | 4.7 TCR |
| NAICS-TCR | Form G Tech Co. | 4.7 TCR |
| NAICS-TCR | Syst-A-Matic Tool & Design Inc. | 4.6 TCR |
| STATE-SIZE | Arlene Resource Management LLC | 229 FTE |
| STATE-SIZE | 1041P - Grand Rapids Production | 229 FTE |
| STATE-SIZE | A-1 Screen Printing dba Underground Printing | 229 FTE |
| STATE-SIZE | Asahi Kasei Plastics Michigan | 229 FTE |
| CITY-NEAR | FCA US Headquarters and Technology Center | 14,088 FTE |
| CITY-NEAR | FCA US Headquarters and Technology | 12,609 FTE |
| CITY-NEAR | Continental - Auburn Hills North | 1,318 FTE |
| CITY-NEAR | CTC Pilot Plant | 1,094 FTE |
| NAT-TCR | Drug Plastics and Glass Co., Inc. - Valley City, ND | 4.7 TCR |
| NAT-TCR | At Home Stores #71 | 4.7 TCR |
| NAT-TCR | Gray County Feed Yard | 4.7 TCR |
| NAT-TCR | Tampa Terminal | 4.7 TCR |
| NAT-SIZE | Enterprise 54A1 | 229 FTE |
| NAT-SIZE | 170 Asg - Waynesboro | 229 FTE |
| NAT-SIZE | Advance Mechanical Systems, Inc. | 229 FTE |
| NAT-SIZE | Falkner Farms | 229 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.