Buckets, elevator or conveyor, manufacturing · Texas
Time Manufacturing Versalift
Waco, TX · ~360 workers · 4 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.9
- Avg TCR
- 3.3
- Industry avg
- 1
- Fatality
The verdict
Time Manufacturing Versalift runs at 118% of its industry's injury rate - about level with the typical Buckets, elevator or conveyor, manufacturing workplace, earning a grade C.
- C
- Average Safety Record
- 3.9
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 1
- worker fatalities on record
Grade compares Time Manufacturing Versalift's OSHA Total Case Rate of 3.9 to the Buckets, elevator or conveyor, manufacturing BLS benchmark of 3.3 (118% of benchmark) across 4 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Time Manufacturing Versalift's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Time Manufacturing Versalift falls in its industry
412 Buckets, elevator or conveyor, establishmentsSafer than 39% of graded establishments in this industry, whose median TCR is 3.0.
Narrower to Texas alone (the establishments it most directly competes with for workers and contracts): ranked #15 safest of 21 Buckets, elevator or conveyor, employers in Texas.
Trend analysis for Time Manufacturing Versalift
Between 2018 and 2021, Time Manufacturing Versalift's Total Case Rate improved from 5.7 to 2.5 recordable injuries per 100 full-time workers, a 55% decrease across 3 years of OSHA reporting.
The safest year on record was 2020, at a TCR of 0.0, while 2019 saw the highest rate, at 7.2, a spread of 7.2 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 4 reporting years, Time Manufacturing Versalift recorded 70 total injuries and illnesses and 1 fatality. Readers comparing establishments should weigh the 4-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 70 injuries, and 1 fatality shown on this page for Time Manufacturing Versalift are sourced from its own 4 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 333922 - Buckets, elevator or conveyor, manufacturing.
DART Rate, Transparent Calculation (2021)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
12 DART incidents × 200,000 ÷ 1,020,371 hours worked = 2.35 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Time Manufacturing Versalift (this establishment) | 3.89 | OSHA ITA Form 300A, 4-year avg |
| Belt conveyor systems manufacturing industry avg | 3.30 | BLS IIF, NAICS 333922 |
| Texas state avg (all industries) | 3.73 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Time Manufacturing Versalift to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2021: 13 reportable incidents · 13 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 9 reportable incidents · 8 injuries, 0 illnesses, 1 fatality - OSHA inspection records (case numbers)
- 2019: 29 reportable incidents · 29 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 20 reportable incidents · 20 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2021 | 2.5 | 2.4 | 13 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 8 | 0 | 1 |
| 2019 | 7.2 | 5.7 | 29 | 0 | 0 |
| 2018 | 5.7 | 5.7 | 20 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Time Manufacturing Versalift's reported OSHA injury record versus its Buckets, elevator or conveyor, manufacturing peers, not a verdict on whether any single site is safe today.
- At 118% of the Buckets, elevator or conveyor, manufacturing benchmark, Time Manufacturing Versalift reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Buckets, elevator or conveyor, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Time Manufacturing Versalift's safety grade?
How many injuries has Time Manufacturing Versalift reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Texas, and by nearby establishments in Waco - a different peer set than the category browse links below.
Similar TCR (~3.9)
Similar size (~360 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.