Boiler casings manufacturing · Tennessee
VPI Precision Holdings, LLC
Morristown, TN · ~66 workers · 2 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 2.6
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
VPI Precision Holdings, LLC runs at 80% of its industry's injury rate - about level with the typical Boiler casings manufacturing workplace, earning a grade C.
- C
- Average Safety Record
- 2.6
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 4
- recordable injuries tracked
Grade compares VPI Precision Holdings, LLC's OSHA Total Case Rate of 2.6 to the Boiler casings manufacturing BLS benchmark of 3.3 (80% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
VPI Precision Holdings, LLC's yearly Total Case Rate, against the 3.3 industry benchmark.
Where VPI Precision Holdings, LLC falls in its industry
187 Boiler casings manufacturing establishmentsSafer than 50% of graded establishments in this industry, whose median TCR is 2.6.
Narrower to Tennessee alone (the establishments it most directly competes with for workers and contracts): ranked #5 safest of 6 Boiler casings manufacturing employers in Tennessee.
Trend analysis for VPI Precision Holdings, LLC
Between 2022 and 2023, VPI Precision Holdings, LLC's Total Case Rate worsened from 1.6 to 3.6 recordable injuries per 100 full-time workers, a 121% increase across 1 year of OSHA reporting.
The safest year on record was 2022, at a TCR of 1.6, while 2023 saw the highest rate, at 3.6, a spread of 2.0 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 2 reporting years, VPI Precision Holdings, LLC recorded 4 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 4 injuries shown on this page for VPI Precision Holdings, LLC are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332410 - Boiler casings manufacturing.
DART Rate, Transparent Calculation (2023)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
3 DART incidents × 200,000 ÷ 164,227 hours worked = 3.65 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| VPI Precision Holdings, LLC (this establishment) | 2.65 | OSHA ITA Form 300A, 2-year avg |
| Manufacture Heat Recovery Equipment industry avg | 3.30 | BLS IIF, NAICS 332410 |
| Tennessee state avg (all industries) | 4.09 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by VPI Precision Holdings, LLC to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2023: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 3.6 | 3.6 | 3 | 0 | 0 |
| 2022 | 1.6 | 1.6 | 1 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on VPI Precision Holdings, LLC's reported OSHA injury record, strong versus its Boiler casings manufacturing peers, but not a guarantee about any single site today.
- At 80% of the Boiler casings manufacturing benchmark, VPI Precision Holdings, LLC reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Boiler casings manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is VPI Precision Holdings, LLC's safety grade?
How many injuries has VPI Precision Holdings, LLC reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Tennessee, and by nearby establishments in Morristown - a different peer set than the category browse links below.
Similar TCR (~2.6)
Similar size (~66 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.