Door frames and sash, wood and covered wood, manufacturing · Ohio
Wayne Dalton - Mt. Hope
MT. HOPE, OH · ~613 workers · 3 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.3
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Wayne Dalton - Mt. Hope runs at 69% of its industry's injury rate - safer than the typical Door frames and sash, wood and covered wood, manufacturing workplace, earning a grade B.
- B
- Good Safety Record
- 2.3
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 49
- recordable injuries tracked
Grade compares Wayne Dalton - Mt. Hope's OSHA Total Case Rate to the BLS industry benchmark across 3 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
Wayne Dalton - Mt. Hope's yearly Total Case Rate, against the 3.3 industry benchmark.
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 321911.
Where Wayne Dalton - Mt. Hope falls in its industry
473 Door frames and sash, wood and establishmentsSafer than 77% of graded establishments in this industry, whose median TCR is 4.8.
Wayne Dalton - Mt. Hope has an average TCR of 2.3, which is 69% of the industry average (3.3) for Door frames and sash, wood and covered wood, manufacturing. This is better than average.
Safety Insights for Wayne Dalton - Mt. Hope
Wayne Dalton - Mt. Hope operates an establishment with approximately 613 full-time equivalent workers in MT. HOPE, OH, classified under the Door frames and sash, wood and covered wood, manufacturing industry (NAICS 321911). Across 3 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 49 recordable injuries, 0 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 2.3 injuries per 100 full-time workers per year provides the anchor metric for the B letter grade (Good Safety Record).
Benchmarked against the Bureau of Labor Statistics industry average of 3.3 for Door frames and sash, wood and covered wood, manufacturing, Wayne Dalton - Mt. Hope's workforce experiences 69% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked, a 200,000-hour exposure base equals roughly 100 full-time workers, so establishments with very different headcounts can be compared directly. A TCR below the benchmark signals that controls, training, or automation may be outperforming peers.
Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 3 reporting cycles points to systemic hazard exposure. Readers evaluating Wayne Dalton - Mt. Hope as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries, there is no modeling, estimation, or third-party adjustment layered on top of the government data.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Wayne Dalton - Mt. Hope's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 321911 - Door frames and sash, wood and covered wood, manufacturing.
DART Rate, Transparent Calculation (2018)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
15 DART incidents × 200,000 ÷ 1,389,910 hours worked = 2.16 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Wayne Dalton - Mt. Hope (this establishment) | 2.27 | OSHA ITA Form 300A, 3-year avg |
| Door frames and sash, wood and covered wood, manufacturing industry avg | 3.30 | BLS IIF, NAICS 321911 |
| Ohio state avg (all industries) | 3.90 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Wayne Dalton - Mt. Hope to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2018: 18 reportable incidents · 18 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 18 reportable incidents · 18 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 13 reportable incidents · 13 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2018 | 2.6 | 2.2 | 18 | 0 | 0 |
| 2017 | 2.5 | 1.4 | 18 | 0 | 0 |
| 2016 | 1.8 | 1.8 | 13 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Wayne Dalton - Mt. Hope's reported OSHA injury record, strong versus its Door frames and sash, wood and covered wood, manufacturing peers, but not a guarantee about any single site today.
- At 69% of the Door frames and sash, wood and covered wood, manufacturing benchmark, Wayne Dalton - Mt. Hope reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Door frames and sash, wood and covered wood, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Wayne Dalton - Mt. Hope's safety grade?
How is the safety grade calculated?
How many injuries has Wayne Dalton - Mt. Hope reported?
Where does PlainSafetyScore get its data?
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.