Casings, sausage, nonrigid plastics, manufacturing · South Carolina

Zeus Aiken

Aiken, SC · ~220 workers · 9 years of OSHA Injury Tracking Application data.

B
Good Safety Record
1.8
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

Zeus Aiken runs at 55% of its industry's injury rate - safer than the typical Casings, sausage, nonrigid plastics, manufacturing workplace, earning a grade B.

B
Good Safety Record
1.8
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
30
recordable injuries tracked

Grade compares Zeus Aiken's OSHA Total Case Rate to the BLS industry benchmark across 9 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.

Injury rate over time

Zeus Aiken's yearly Total Case Rate, against the 3.3 industry benchmark.

-202468 201620172018201920202021202220232024 0.83.3 Industry benchmarkZeus Aiken TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 326121.

Where Zeus Aiken falls in its industry

220 Casings, sausage, nonrigid pla establishments

Safer than 72% of graded establishments in this industry, whose median TCR is 3.2.

More dangerous than peersSafer than peers

Narrower to South Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #6 safest of 11 Casings, sausage, nonrigid pla employers in South Carolina.

Zeus Aiken has an average TCR of 1.8, which is 55% of the industry average (3.3) for Casings, sausage, nonrigid plastics, manufacturing. This is better than average.

The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.

Trend analysis for Zeus Aiken

Between 2016 and 2024, Zeus Aiken's Total Case Rate improved from 2.9 to 0.8 recordable injuries per 100 full-time workers, a 74% decrease across 8 years of OSHA reporting.

The safest year on record was 2020, at a TCR of 0.0, while 2017 saw the highest rate, at 5.8, a spread of 5.8 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 9 reporting years, Zeus Aiken recorded 30 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 9-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

All injury, illness, and fatality figures on this page are sourced from Zeus Aiken's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 326121 - Casings, sausage, nonrigid plastics, manufacturing.

DART Rate, Transparent Calculation (2024)

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

2 DART incidents × 200,000 ÷ 524,025 hours worked = 0.76 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Zeus Aiken (this establishment) 1.80 OSHA ITA Form 300A, 9-year avg
Profile shapes (e.g., rod, tube), nonrigid plastics, manufacturing industry avg 3.30 BLS IIF, NAICS 326121
South Carolina state avg (all industries) 4.08 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Zeus Aiken to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 0.8 0.8 2 0 0
2023 0.3 0.3 1 0 0
2022 0.4 0.4 1 0 0
2021 0.0 0.0 0 0 0
2020 0.0 0.0 0 0 0
2019 3.5 2.2 8 0 0
2018 2.5 2.5 5 0 0
2017 5.8 5.8 9 0 0
2016 2.9 2.9 4 0 0

What this grade means for you

Use this grade as a relative read on Zeus Aiken's reported OSHA injury record, strong versus its Casings, sausage, nonrigid plastics, manufacturing peers, but not a guarantee about any single site today.

  • At 55% of the Casings, sausage, nonrigid plastics, manufacturing benchmark, Zeus Aiken reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
  • Judge this record against the wider Casings, sausage, nonrigid plastics, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Zeus Aiken's safety grade?
Zeus Aiken has a safety grade of B (Good Safety Record). This grade is based on their average Total Case Rate (TCR) of 1.8 compared to the BLS industry benchmark of 3.3 for Casings, sausage, nonrigid plastics, manufacturing.
How many injuries has Zeus Aiken reported?
Zeus Aiken has reported 30 total injuries and 0 fatalities across 9 years of OSHA data (2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry and by workforce size within South Carolina - a different peer set than the category browse links below.

Similar TCR (~1.8)

Similar size (~220 workers)

Explore More Safety Data

→ More employers in South Carolina → Industry: Casings, sausage, nonrigid plastics, manufacturing → Safety grades explained → How to check employer safety → Understanding OSHA rates
Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Related

All employers → | Rankings →
Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.