State profile · OSHA ITA

Alabama workplace safety

How 7,418 OSHA-reporting employers across Alabama compare on workplace injuries, 2016–2024. Average TCR uses the 6,438 establishments with a credible rate (see methodology).

7,418
Employers
4.7
Avg TCR (rated)
122,249
Injuries (all)
151
Fatalities (all)

TCR, interpreted

Far above average

4.7 avg TCR

Alabama vs all states by OSHA-reporting employer count

Where this state's ITA establishment inventory sits among every tracked state and territory (coverage signal, not a safety ranking)

7,418 25th of 54 higher than 29 of 54 states

States and territories, banded by OSHA ITA reporting employer count

Each bar is a band; taller bars hold more states. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.

Source official public datasets · 2026

The state picture

Alabama's 6,438 rated reporting employers average 4.7 recordable injuries per 100 workers, 1.7 times the ~2.7 all-industry private-sector norm.

4.7
avg TCR · rated subset
6,438
rated employers
7,418
all reporting employers
122,249
recordable injuries (all)

Inventory counts and injury/fatality totals cover all 7,418 ITA establishments; the average TCR excludes zero-rate and corrupt-hours filings. See Methodology → Three Populations.

Alabama grade distribution 7,416 graded establishments · width = share

18% of Alabama's reporting establishments earn an F and 18% an A, each measured against its own industry benchmark, not the state line. These grades are a transparent derived index, not an official OSHA rating; see the Methodology for the exact formula.

Where Alabama ranks among states

54 states & territories by avg TCR

Alabama's average TCR of 4.7 is lower than 75% of states, a state average reflects industry mix as much as workplace safety.

Higher avg TCRLower avg TCR

A second cut tells a different story: ranked by rated-subset injury rate alone, Alabama is #14 of 54. Ranked instead by fatalities per rated employer establishment (same 6,438-employer subset), it's #51 of 54, a 37-place swing. A state can run a moderate everyday injury rate while its rarer, most severe incidents cluster differently; the two metrics measure different things on the same population and shouldn't be read as interchangeable.

How Alabama Workplaces Compare

Alabama hosts 7,418 employer establishments currently reporting to OSHA's Injury Tracking Application. These are not small shops: federal rules require ITA submission from workplaces with 250+ employees in any industry, plus workplaces with 20+ employees in the roughly 60 NAICS codes classified as high-hazard (construction, manufacturing, healthcare, warehousing, agriculture, and others). Across this Alabama cohort, workers have logged 122,249 recordable injuries. The published state average Total Case Rate (TCR) of 4.7 injuries per 100 full-time workers uses the 6,438 establishments with a credible rate (zero-rate and corrupt-hours filings stay in the inventory counts above but are excluded from the average, see methodology).

The state has recorded 151 workplace fatalities in the reporting window, which is tracked separately from non-fatal injury counts because fatal events have their own investigation trail under 29 CFR 1904.39. Reading state-level TCR requires context: the headline figure is driven by a state's industry mix. A state with a heavy construction, logging, or meatpacking footprint will mechanically post higher TCR than a state dominated by finance or professional services, even when individual employers are equally well-managed. That is why the employer table below sorts each establishment by its own TCR and letter grade, against the BLS benchmark for its specific industry, not against the state average.

For jobseekers, relocators, investors, and local safety professionals, state-level pages function as an entry point: use the grade-sorted list to spot the safest and highest-risk employers in Alabama, then click through to an individual establishment for its year-by-year injury, illness, DART, and fatality trajectory. Compare multiple years before drawing conclusions, a single outlier year can reflect a specific event, whereas a sustained pattern across reporting cycles is a more reliable risk signal. All data comes directly from employer-submitted OSHA Form 300A summaries. State OSHA plans in 22 states operate their own enforcement programs in parallel, but the injury data above is harmonized through the federal ITA system.

Employers in Alabama, by injury rate

Page 125 of 149
EmployerCityIndustryGradeAvg TCR
HALCM01CullmanPrecision MachiningA0.5
Constellium Muscle Shoals Muscle Shoals ALMuscle Shoals-A0.5
S Services - BHM Plaza 605BirminghamDistribution of natural gasA0.5
Marathon Electrical Contractors, LLCIrondaleElectrical contractorsA0.5
Tree Professional, Inc.KillenTree removal servicesA0.5
Sanmina/SCIHuntsvilleLoaded computer boards manufA0.5
Consolidated Power SupplyBirminghamTubing, metal, merchant wholA0.5
CorporateHuntsvilleEngineering servicesC0.5
Honeywell Anniston R&OAnnistonAircraft assemblies, subasseA0.5
Southern Gas and Supply of BirminghamBirminghamLiquefied petroleum gas (LPGA0.5
Perry Supply BirminghamBirminghamGeneral-line industrial suppA0.5
G.A. West & CoCreolaIndustrial building (except A0.5
TuscaloosaCottondaleAircraft manufacturingA0.5
Leonardo DRS-Huntsville, AL FacilitiesHuntsvilleElectrical engineering serviC0.5
Rohr Inc (Foley AL)FoleyAssembly of aircraft nacelleA0.5
STERIS CorporationMontgomerySterilizers, hospital and suA0.5
EGS Financial Care Inc - MobileMobileAccount collection servicesA0.5
Andress Engineering Associates, IncAlabasterBrakes and parts for railroaA0.5
BioHorizons Implant Systems, Inc.BirminghamDental equipment and instrumA0.5
Burfords Tree LLC - 347AlexandriaArborist servicesA0.5
ILJINPhenix CityBearings (e.g., camshaft, crA0.5
Mobile, AL - Jackson, MS HVACMobile-A0.5
MillerQuintonAsh collection servicesA0.4
MMR Constructors, Inc. - Mobile OperationsTheodoreElectrical contractorsA0.4
Headland GP Shelling PlantHeadland-A0.4
Huntsville officeHuntsvilleEnvironmental remediation seA0.4
1331 - HooverHoover-A0.4
PPM Consultants, Inc. - BirminghamBirminghamEnvironmental remediation seA0.4
Mobile BranchMobileFasteners (e.g., bolts, nutsA0.4
Melvin Pierce Painting Inc.SemmesPainting and wallpaperingA0.4
APR/DinanOpelikaGenerating apparatus and parA0.4
ConstelliumMuscle ShoalsSheet, aluminum, made in intA0.4
United RoofingEutawAsphalt saturated mats and fA0.4
Henry County GinHeadlandCotton ginningA0.4
Honeywell/UOP AL37ChickasawSodium aluminate manufacturiA0.4
Dothan warehouse Cold StorageDothanGeneral warehousing and storA0.4
Rogers & Willard, Inc.MobileCommercial building construcA0.4
Nucor Steel Tuscaloosa, Inc.TuscaloosaPlate, iron or steel, made iA0.4
BRHMALDCHoover-B0.4
USA RoanokeRoanokeBackingA0.4
American EnvironmentalChunchulaSite remediation servicesA0.4
Revere Control SystemsBirminghamLow voltage electrical workA0.4
Corporate OfficeVestaviaCorporate officesB0.4
Turenne PharMedCoMontgomeryDressings, medical, merchantA0.4
Mobile Infirmary - PTMobile-A0.4
Great Southern Wood - AbbevilleAbbevilleWood PreservationA0.4
D.R. Horton, Inc. - BirminghamHooverNew Single-Family Housing CoA0.4
Von Braun CenterHuntsvillePallet rental or leasingA0.4
RWFT US AL Ft Rucker AL AL985Enterprise-A0.4
Enterprise Staffing Eal LLCEnterpriseTemporary staffing servicesA0.4
← Prev Page 125 of 149 Next →

Nationwide states with similar injury rates or employer scale

Two PlainSafetyScore-derived peer sets for Alabama: nearest states and territories by rated-subset average Total Case Rate and by OSHA-reporting employer inventory. These are cross-state neighborhoods, not the employer list above.

Similar average TCR

Nearest states by rated-subset Total Case Rate (4.7 here).

Similar employer inventory

Nearest states by reporting employer count (7,418 here).

Look up a Alabama employer → · Compare all states → · How TCR is measured →

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore

Verify with BLS →

Verify with OSHA →

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.