State profile · OSHA ITA

Georgia workplace safety

How 14,941 OSHA-reporting employers across Georgia compare on workplace injuries, 2016–2024. Average TCR uses the 13,047 establishments with a credible rate (see methodology).

14,941
Employers
4.6
Avg TCR (rated)
273,626
Injuries (all)
201
Fatalities (all)

TCR, interpreted

Far above average

4.6 avg TCR

Georgia vs all states by OSHA-reporting employer count

Where this state's ITA establishment inventory sits among every tracked state and territory (coverage signal, not a safety ranking)

14,941 11th of 54 higher than 43 of 54 states

States and territories, banded by OSHA ITA reporting employer count

Each bar is a band; taller bars hold more states. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.

Source official public datasets · 2026

The state picture

Georgia's 13,047 rated reporting employers average 4.6 recordable injuries per 100 workers, 1.7 times the ~2.7 all-industry private-sector norm.

4.6
avg TCR · rated subset
13,047
rated employers
14,941
all reporting employers
273,626
recordable injuries (all)

Inventory counts and injury/fatality totals cover all 14,941 ITA establishments; the average TCR excludes zero-rate and corrupt-hours filings. See Methodology → Three Populations.

Georgia grade distribution 14,934 graded establishments · width = share

18% of Georgia's reporting establishments earn an F and 19% an A, each measured against its own industry benchmark, not the state line. These grades are a transparent derived index, not an official OSHA rating; see the Methodology for the exact formula.

Where Georgia ranks among states

54 states & territories by avg TCR

Georgia's average TCR of 4.6 is lower than 81% of states, a state average reflects industry mix as much as workplace safety.

Higher avg TCRLower avg TCR

A second cut tells a different story: ranked by rated-subset injury rate alone, Georgia is #11 of 54. Ranked instead by fatalities per rated employer establishment (same 13,047-employer subset), it's #35 of 54, a 24-place swing. A state can run a moderate everyday injury rate while its rarer, most severe incidents cluster differently; the two metrics measure different things on the same population and shouldn't be read as interchangeable.

How Georgia Workplaces Compare

Georgia hosts 14,941 employer establishments currently reporting to OSHA's Injury Tracking Application. These are not small shops: federal rules require ITA submission from workplaces with 250+ employees in any industry, plus workplaces with 20+ employees in the roughly 60 NAICS codes classified as high-hazard (construction, manufacturing, healthcare, warehousing, agriculture, and others). Across this Georgia cohort, workers have logged 273,626 recordable injuries. The published state average Total Case Rate (TCR) of 4.6 injuries per 100 full-time workers uses the 13,047 establishments with a credible rate (zero-rate and corrupt-hours filings stay in the inventory counts above but are excluded from the average, see methodology).

The state has recorded 201 workplace fatalities in the reporting window, which is tracked separately from non-fatal injury counts because fatal events have their own investigation trail under 29 CFR 1904.39. Reading state-level TCR requires context: the headline figure is driven by a state's industry mix. A state with a heavy construction, logging, or meatpacking footprint will mechanically post higher TCR than a state dominated by finance or professional services, even when individual employers are equally well-managed. That is why the employer table below sorts each establishment by its own TCR and letter grade, against the BLS benchmark for its specific industry, not against the state average.

For jobseekers, relocators, investors, and local safety professionals, state-level pages function as an entry point: use the grade-sorted list to spot the safest and highest-risk employers in Georgia, then click through to an individual establishment for its year-by-year injury, illness, DART, and fatality trajectory. Compare multiple years before drawing conclusions, a single outlier year can reflect a specific event, whereas a sustained pattern across reporting cycles is a more reliable risk signal. All data comes directly from employer-submitted OSHA Form 300A summaries. State OSHA plans in 22 states operate their own enforcement programs in parallel, but the injury data above is harmonized through the federal ITA system.

Employers in Georgia, by injury rate

Page 219 of 299
EmployerCityIndustryGradeAvg TCR
256 - Columbus -SColumbusIndustrial LaunderersB1.4
Oaks at Suwanee CreekSuwaneeAssisted-living facilities wA1.4
Big Lots Store #1798 Dublin, GADublinRetail OtherA1.4
North CampusCarrolltonWire & Cable CompanyA1.4
4263-3293AtlantaHotelsA1.4
ATL - Flight OpsAtlantaScheduled Passenger Air TranA1.4
H2H Blinds - Lawrenceville #555LawrencevilleWindow shade and blind instaA1.4
Manufacturing ResourcesAlpharettaOther Elec Component ManufacA1.4
DTCH 61004 ReynoldsReynoldsTanker trucking chemicalA1.4
WinderWinderBed stores, retailA1.4
Logistec USA - BrunswickBrunswickMarine cargo handling servicA1.4
RinggoldRinggoldMotor Vehicle & Motor VehiclB1.4
Atlanta / Decatur TerminalDecaturGeneral freight trucking, loA1.4
Lund InternationalLawrencevilleAwnings, rigid plastics or fA1.4
iFIT Savannah Distribution CenterPoolerSporting goods (except ammunA1.4
Georgia (30)DoravilleElectric contractingA1.4
Western Specialty Contractors- AtlantaAtlantaMasonry contractorsA1.4
Seaonus Stevedoring Savannah LLCSavannahWaterfront terminal operatioA1.4
Atl - DhlMableton-A1.4
107LoganvilleAutomobile and Other Motor VB1.4
HG1031ChambleeHomefurnishings storesA1.4
Meridian Bricks-Augusta 015-Meridian BricksAugustaBlocks, fire clay, manufactuA1.4
Power Smyrna PlantSmyrna-A1.4
Coveris TiftonTiftonPaper Bag and Coated and TreA1.4
Jefferson DistributionJeffersonGas DistributionB1.4
Koyo Bearings NASylvaniaNeedle roller bearings manufA1.4
Sodexo at Clark Atlanta Resident DiningAtlantaFood Service ContractorsA1.4
Magnum Contracting, LLCJasperGrading construction sitesA1.4
Satilla GroceryWaynesvilleGrocery storesA1.4
Carnesville GACarnesvilleJohn Deere Equipment DealerB1.4
Benning Construction CompanyAtlantaAddition, alteration and renA1.4
Valdosta RefineryValdosta-A1.4
Ashburn GP Shelling PlantAshburn-A1.4
Alcon JCMJohns CreekContact lenses manufacturingA1.4
Oaks at SavannahSavannahAssisted-living facilities wA1.4
4186-00717DecaturAll Other General MerchandisA1.4
US - Branch Network : 0038NorcrossMerchant Wholesalers, DurablB1.4
Osmose Utilities Services, Inc.Peachtree CityConstruction management, powA1.4
Pinkerton & LawsMariettaAddition, alteration and renA1.4
Pro-Lectric Industrial Contractors, Inc.LavoniaLow voltage electrical workA1.3
Atlanta - BMDAuburnWood Window and Door ManufacA1.3
Columbus Clearance Center #1074ColumbusFurniture and appliance storA1.3
Grassco Landscape Management, LLCAtlantaLandscape care and maintenanA1.3
5WT LLC MTN View Chrysler Dodge Jeep RamRinggoldAutomobile dealers, new onlyA1.3
Cutting Edge Laser Machining, Inc.CovingtonSheet metal work (except staA1.3
Stewart Brothers IncDoravilleCement (e.g., hydraulic, masA1.3
The Cottages at RockmartRockmartNursing homesA1.3
Duncan M StewartLagrangeRugs and carpets made from tA1.3
Avient KennesawKennesawCustom compounding (i.e., blA1.3
International Paper - Savannah MillSavannahPaper (except newsprint, uncA1.3
← Prev Page 219 of 299 Next →

Nationwide states with similar injury rates or employer scale

Two PlainSafetyScore-derived peer sets for Georgia: nearest states and territories by rated-subset average Total Case Rate and by OSHA-reporting employer inventory. These are cross-state neighborhoods, not the employer list above.

Similar average TCR

Nearest states by rated-subset Total Case Rate (4.6 here).

Similar employer inventory

Nearest states by reporting employer count (14,941 here).

Look up a Georgia employer → · Compare all states → · How TCR is measured →

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore

Verify with BLS →

Verify with OSHA →

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.