Aluminum shapes (e.g., bar, ingot, rod, sheet) made by producing primary aluminum and manufacturing · New York
AFE Massena Operations
Massena, NY · ~150 workers · 3 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 1.5
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
AFE Massena Operations runs at 45% of its industry's injury rate - far safer than the typical Aluminum shapes (e.g., bar, ingot, rod, sheet) made by producing primary aluminum and manufacturing workplace, earning a grade A.
- A
- Excellent Safety Record
- 1.5
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 7
- recordable injuries tracked
Grade compares AFE Massena Operations's OSHA Total Case Rate of 1.5 to the Aluminum shapes (e.g., bar, ingot, rod, sheet) made by producing primary aluminum and manufacturing BLS benchmark of 3.3 (45% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
AFE Massena Operations's yearly Total Case Rate, against the 3.3 industry benchmark.
Where AFE Massena Operations falls in its industry
54 Aluminum shapes (e.g., bar, in establishmentsSafer than 78% of graded establishments in this industry, whose median TCR is 2.8.
Trend analysis for AFE Massena Operations
Between 2016 and 2018, AFE Massena Operations's Total Case Rate improved from 2.0 to 0.6 recordable injuries per 100 full-time workers, a 71% decrease across 2 years of OSHA reporting.
The safest year on record was 2018, at a TCR of 0.6, while 2016 saw the highest rate, at 2.0, a spread of 1.4 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 3 reporting years, AFE Massena Operations recorded 7 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 7 injuries shown on this page for AFE Massena Operations are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331313 - Aluminum shapes (e.g., bar, ingot, rod, sheet) made by producing primary aluminum and manufacturing.
DART Rate, Transparent Calculation (2018)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 336,603 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| AFE Massena Operations (this establishment) | 1.47 | OSHA ITA Form 300A, 3-year avg |
| Primary aluminum production and manufacturing aluminum shapes (e.g., bar, ingot, rod, sheet) industry avg | 3.30 | BLS IIF, NAICS 331313 |
| New York state avg (all industries) | 4.67 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by AFE Massena Operations to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2018: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2018 | 0.6 | 0.0 | 1 | 0 | 0 |
| 2017 | 1.8 | 1.2 | 3 | 0 | 0 |
| 2016 | 2.0 | 0.7 | 3 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on AFE Massena Operations's reported OSHA injury record, strong versus its Aluminum shapes (e.g., bar, ingot, rod, sheet) made by producing primary aluminum and manufacturing peers, but not a guarantee about any single site today.
- At 45% of the Aluminum shapes (e.g., bar, ingot, rod, sheet) made by producing primary aluminum and manufacturing benchmark, AFE Massena Operations reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Aluminum shapes (e.g., bar, ingot, rod, sheet) made by producing primary aluminum and manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is AFE Massena Operations's safety grade?
How many injuries has AFE Massena Operations reported?
Similar Employers
Matched by safety record across the industry, by workforce size within New York, and by nearby establishments in Massena - a different peer set than the category browse links below.
Similar TCR (~1.5)
Similar size (~150 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.