Zinc recovering from scrap and/or alloying purchased metals · North Carolina
American Zinc Products, LLC
Mooresboro, NC · ~290 workers · 3 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 2.8
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
American Zinc Products, LLC runs at 85% of its industry's injury rate - about level with the typical Zinc recovering from scrap and/or alloying purchased metals workplace, earning a grade C.
- C
- Average Safety Record
- 2.8
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 31
- recordable injuries tracked
Grade compares American Zinc Products, LLC's OSHA Total Case Rate of 2.8 to the Zinc recovering from scrap and/or alloying purchased metals BLS benchmark of 3.3 (85% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
American Zinc Products, LLC's yearly Total Case Rate, against the 3.3 industry benchmark.
Where American Zinc Products, LLC falls in its industry
139 Zinc recovering from scrap and establishmentsSafer than 58% of graded establishments in this industry, whose median TCR is 3.6.
Narrower to North Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #7 safest of 10 Zinc recovering from scrap and employers in North Carolina.
Trend analysis for American Zinc Products, LLC
Between 2019 and 2021, American Zinc Products, LLC's Total Case Rate worsened from 1.4 to 2.7 recordable injuries per 100 full-time workers, a 90% increase across 2 years of OSHA reporting.
The safest year on record was 2019, at a TCR of 1.4, while 2020 saw the highest rate, at 4.3, a spread of 2.9 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 3 reporting years, American Zinc Products, LLC recorded 31 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 31 injuries, 1 illnesses shown on this page for American Zinc Products, LLC are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331492 - Zinc recovering from scrap and/or alloying purchased metals.
DART Rate, Transparent Calculation (2021)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
8 DART incidents × 200,000 ÷ 666,086 hours worked = 2.40 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| American Zinc Products, LLC (this establishment) | 2.81 | OSHA ITA Form 300A, 3-year avg |
| Nonferrous alloys (except aluminum, copper) made in integrated secondary smelting and alloying plants industry avg | 3.30 | BLS IIF, NAICS 331492 |
| North Carolina state avg (all industries) | 3.89 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by American Zinc Products, LLC to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2021: 9 reportable incidents · 8 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 19 reportable incidents · 19 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2021 | 2.7 | 2.4 | 8 | 1 | 0 |
| 2020 | 4.3 | 3.2 | 19 | 0 | 0 |
| 2019 | 1.4 | 0.3 | 4 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on American Zinc Products, LLC's reported OSHA injury record, strong versus its Zinc recovering from scrap and/or alloying purchased metals peers, but not a guarantee about any single site today.
- At 85% of the Zinc recovering from scrap and/or alloying purchased metals benchmark, American Zinc Products, LLC reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Zinc recovering from scrap and/or alloying purchased metals sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is American Zinc Products, LLC's safety grade?
How many injuries has American Zinc Products, LLC reported?
Similar Employers
Matched by safety record across the industry, by workforce size within North Carolina, and by nearby establishments in Mooresboro - a different peer set than the category browse links below.
Similar TCR (~2.8)
Similar size (~290 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.