Insulation and cushioning, foam plastics (except polystrene), manufacturing · Arizona

Atlas Roofing Corporation - Phoenix AZ

Phoenix, AZ · ~27 workers · 5 years of OSHA Injury Tracking Application data.

C
Average Safety Record
0.0
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

Atlas Roofing Corporation - Phoenix AZ runs at 0% of its industry's injury rate - about level with the typical Insulation and cushioning, foam plastics (except polystrene), manufacturing workplace, earning a grade C.

C
Average Safety Record
0.0
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
0
recordable injuries tracked

Grade compares Atlas Roofing Corporation - Phoenix AZ's OSHA Total Case Rate of 0.0 to the Insulation and cushioning, foam plastics (except polystrene), manufacturing BLS benchmark of 3.3 (0% of benchmark) across 5 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

Atlas Roofing Corporation - Phoenix AZ's yearly Total Case Rate, against the 3.3 industry benchmark.

-101234 20162018201920202021 03.3 Industry benchmarkAtlas Roofing Corporation - Phoenix AZ TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 326150.

Where Atlas Roofing Corporation - Phoenix AZ falls in its industry

499 Insulation and cushioning, foa establishments

Safer than 95% of graded establishments in this industry, whose median TCR is 3.0.

More dangerous than peersSafer than peers

Narrower to Arizona alone (the establishments it most directly competes with for workers and contracts): ranked #2 safest of 7 Insulation and cushioning, foa employers in Arizona.

Trend analysis for Atlas Roofing Corporation - Phoenix AZ

Between 2016 and 2021, Atlas Roofing Corporation - Phoenix AZ's Total Case Rate held roughly steady from 0.0 to 0.0 recordable injuries per 100 full-time workers, a 0% change across 5 years of OSHA reporting.

The safest year on record was 2016, at a TCR of 0.0, while 2016 saw the highest rate, at 0.0, a spread of 0.0 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 5 years with a usable rate on file, rather than one outlier year skewing the multi-year average.

Summed across those 5 reporting years, Atlas Roofing Corporation - Phoenix AZ recorded 0 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 5-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 0 injuries shown on this page for Atlas Roofing Corporation - Phoenix AZ are sourced from its own 5 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 326150 - Insulation and cushioning, foam plastics (except polystrene), manufacturing.

DART Rate, Transparent Calculation (2021)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

0 DART incidents × 200,000 ÷ 50,907 hours worked = 0.00 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Atlas Roofing Corporation - Phoenix AZ (this establishment) 0.00 OSHA ITA Form 300A, 5-year avg
Polyurethane foam products manufacturing industry avg 3.30 BLS IIF, NAICS 326150
Arizona state avg (all industries) 4.73 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Atlas Roofing Corporation - Phoenix AZ to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2021 0.0 0.0 0 0 0
2020 0.0 0.0 0 0 0
2019 0.0 0.0 0 0 0
2018 0.0 0.0 0 0 0
2016 0.0 0.0 0 0 0

What this grade means for you

Use this grade as a relative read on Atlas Roofing Corporation - Phoenix AZ's reported OSHA injury record, strong versus its Insulation and cushioning, foam plastics (except polystrene), manufacturing peers, but not a guarantee about any single site today.

  • At 0% of the Insulation and cushioning, foam plastics (except polystrene), manufacturing benchmark, Atlas Roofing Corporation - Phoenix AZ reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
  • Judge this record against the wider Insulation and cushioning, foam plastics (except polystrene), manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Atlas Roofing Corporation - Phoenix AZ's safety grade?
Atlas Roofing Corporation - Phoenix AZ has a safety grade of C (Average Safety Record). This grade is based on their average Total Case Rate (TCR) of 0.0 compared to the BLS industry benchmark of 3.3 for Insulation and cushioning, foam plastics (except polystrene), manufacturing.
How many injuries has Atlas Roofing Corporation - Phoenix AZ reported?
Atlas Roofing Corporation - Phoenix AZ has reported 0 total injuries and 0 fatalities across 5 years of OSHA data (2021, 2020, 2019, 2018, 2016). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within Arizona, and by nearby establishments in Phoenix - a different peer set than the category browse links below.

Similar TCR (~0.0)

Similar size (~27 workers)

Nearby in Phoenix

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2021, 2020, 2019, 2018, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.