Water well drilling machinery manufacturing · Texas
Bauer Manufacturing LLC
Conroe, TX · ~122 workers · 6 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.5
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Bauer Manufacturing LLC runs at 74% of its industry's injury rate - safer than the typical Water well drilling machinery manufacturing workplace, earning a grade B.
- B
- Good Safety Record
- 2.5
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 17
- recordable injuries tracked
Grade compares Bauer Manufacturing LLC's OSHA Total Case Rate of 2.5 to the Water well drilling machinery manufacturing BLS benchmark of 3.3 (74% of benchmark) across 6 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Bauer Manufacturing LLC's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Bauer Manufacturing LLC falls in its industry
381 Water well drilling machinery establishmentsSafer than 19% of graded establishments in this industry, whose median TCR is 0.9.
Narrower to Texas alone (the establishments it most directly competes with for workers and contracts): ranked #223 safest of 257 Water well drilling machinery employers in Texas.
Trend analysis for Bauer Manufacturing LLC
Between 2016 and 2021, Bauer Manufacturing LLC's Total Case Rate worsened from 3.1 to 3.7 recordable injuries per 100 full-time workers, a 19% increase across 5 years of OSHA reporting.
The safest year on record was 2020, at a TCR of 1.2, while 2021 saw the highest rate, at 3.7, a spread of 2.5 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 6 reporting years, Bauer Manufacturing LLC recorded 17 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 6-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 17 injuries, 1 illnesses shown on this page for Bauer Manufacturing LLC are sourced from its own 6 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 333132 - Water well drilling machinery manufacturing.
DART Rate, Transparent Calculation (2021)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 161,151 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Bauer Manufacturing LLC (this establishment) | 2.45 | OSHA ITA Form 300A, 6-year avg |
| Drilling equipment, oil and gas field-type, manufacturing industry avg | 3.30 | BLS IIF, NAICS 333132 |
| Texas state avg (all industries) | 3.73 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Bauer Manufacturing LLC to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2021: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 4 reportable incidents · 3 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2021 | 3.7 | 0.0 | 3 | 0 | 0 |
| 2020 | 1.2 | 1.2 | 1 | 0 | 0 |
| 2019 | 1.9 | 1.9 | 2 | 0 | 0 |
| 2018 | 3.1 | 2.3 | 3 | 1 | 0 |
| 2017 | 1.7 | 1.7 | 4 | 0 | 0 |
| 2016 | 3.1 | 2.3 | 4 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Bauer Manufacturing LLC's reported OSHA injury record, strong versus its Water well drilling machinery manufacturing peers, but not a guarantee about any single site today.
- At 74% of the Water well drilling machinery manufacturing benchmark, Bauer Manufacturing LLC reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Water well drilling machinery manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Bauer Manufacturing LLC's safety grade?
How many injuries has Bauer Manufacturing LLC reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Texas, and by nearby establishments in Conroe - a different peer set than the category browse links below.
Similar TCR (~2.5)
Similar size (~122 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.