Foundries, iron (i.e., ductile, gray, malleable, semisteel) · Michigan
Blue Diamond Steel Casting LLC
Pigeon, MI · ~301 workers · 9 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 19.1
- Avg TCR
- 3.3
- Industry avg
- 1
- Fatality
The verdict
Blue Diamond Steel Casting LLC runs at 580% of its industry's injury rate - far more dangerous than the typical Foundries, iron (i.e., ductile, gray, malleable, semisteel) workplace, earning a grade F.
- F
- Failing Safety Record
- 19.1
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 1
- worker fatalities on record
Grade compares Blue Diamond Steel Casting LLC's OSHA Total Case Rate of 19.1 to the Foundries, iron (i.e., ductile, gray, malleable, semisteel) BLS benchmark of 3.3 (580% of benchmark) across 9 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Blue Diamond Steel Casting LLC's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Blue Diamond Steel Casting LLC falls in its industry
281 Foundries, iron (i.e., ductile establishmentsSafer than 10% of graded establishments in this industry, whose median TCR is 7.2.
Narrower to Michigan alone (the establishments it most directly competes with for workers and contracts): ranked #25 safest of 26 Foundries, iron (i.e., ductile employers in Michigan.
Trend analysis for Blue Diamond Steel Casting LLC
Between 2016 and 2024, Blue Diamond Steel Casting LLC's Total Case Rate worsened from 13.4 to 22.9 recordable injuries per 100 full-time workers, a 71% increase across 8 years of OSHA reporting.
The safest year on record was 2016, at a TCR of 13.4, while 2022 saw the highest rate, at 25.4, a spread of 12.0 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 9 reporting years, Blue Diamond Steel Casting LLC recorded 538 total injuries and illnesses and 1 fatality. Readers comparing establishments should weigh the 9-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 538 injuries, 87 illnesses, and 1 fatality shown on this page for Blue Diamond Steel Casting LLC are sourced from its own 9 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331511 - Foundries, iron (i.e., ductile, gray, malleable, semisteel).
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
31 DART incidents × 200,000 ÷ 638,106 hours worked = 9.72 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Blue Diamond Steel Casting LLC (this establishment) | 19.13 | OSHA ITA Form 300A, 9-year avg |
| Gray iron foundries industry avg | 3.30 | BLS IIF, NAICS 331511 |
| Michigan state avg (all industries) | 4.73 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Blue Diamond Steel Casting LLC to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 73 reportable incidents · 67 injuries, 6 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 84 reportable incidents · 62 injuries, 22 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 100 reportable incidents · 82 injuries, 17 illnesses, 1 fatality - OSHA inspection records (case numbers)
- 2021: 78 reportable incidents · 65 injuries, 13 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 56 reportable incidents · 56 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 59 reportable incidents · 47 injuries, 12 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 96 reportable incidents · 89 injuries, 7 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 58 reportable incidents · 53 injuries, 5 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 22 reportable incidents · 17 injuries, 5 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 22.9 | 9.7 | 67 | 6 | 0 |
| 2023 | 22.9 | 9.0 | 62 | 22 | 0 |
| 2022 | 25.4 | 12.0 | 82 | 17 | 1 |
| 2021 | 20.1 | 9.3 | 65 | 13 | 0 |
| 2020 | 14.4 | 9.3 | 56 | 0 | 0 |
| 2019 | 13.5 | 7.8 | 47 | 12 | 0 |
| 2018 | 22.4 | 14.0 | 89 | 7 | 0 |
| 2017 | 17.3 | 7.8 | 53 | 5 | 0 |
| 2016 | 13.4 | 5.5 | 17 | 5 | 0 |
What this grade means for you
Use this grade as a relative read on Blue Diamond Steel Casting LLC's reported OSHA injury record versus its Foundries, iron (i.e., ductile, gray, malleable, semisteel) peers, not a verdict on whether any single site is safe today.
- At 580% of the Foundries, iron (i.e., ductile, gray, malleable, semisteel) benchmark, Blue Diamond Steel Casting LLC reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Foundries, iron (i.e., ductile, gray, malleable, semisteel) sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Blue Diamond Steel Casting LLC's safety grade?
How many injuries has Blue Diamond Steel Casting LLC reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Michigan, and by nearby establishments in Pigeon - a different peer set than the category browse links below.
Similar TCR (~19.1)
Similar size (~301 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.