Molds for metal casting (except steel ingot) manufacturing · Michigan

Broaching Machine Specialties

Novi, MI · ~19 workers · 8 years of OSHA Injury Tracking Application data.

F
Failing Safety Record
12.0
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

Broaching Machine Specialties runs at 365% of its industry's injury rate - far more dangerous than the typical Molds for metal casting (except steel ingot) manufacturing workplace, earning a grade F.

F
Failing Safety Record
12.0
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
16
recordable injuries tracked

Grade compares Broaching Machine Specialties's OSHA Total Case Rate of 12.0 to the Molds for metal casting (except steel ingot) manufacturing BLS benchmark of 3.3 (365% of benchmark) across 8 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

Broaching Machine Specialties's yearly Total Case Rate, against the 3.3 industry benchmark.

-100102030 20172018201920202021202220232024 10.83.3 Industry benchmarkBroaching Machine Specialties TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 333511.

Where Broaching Machine Specialties falls in its industry

239 Molds for metal casting (excep establishments

Safer than 6% of graded establishments in this industry, whose median TCR is 3.3.

More dangerous than peersSafer than peers

Narrower to Michigan alone (the establishments it most directly competes with for workers and contracts): ranked #39 safest of 41 Molds for metal casting (excep employers in Michigan.

Trend analysis for Broaching Machine Specialties

Between 2017 and 2024, Broaching Machine Specialties's Total Case Rate held roughly steady from 0.0 to 10.8 recordable injuries per 100 full-time workers, a 0% change across 7 years of OSHA reporting.

The safest year on record was 2017, at a TCR of 0.0, while 2021 saw the highest rate, at 25.9, a spread of 25.9 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 8 reporting years, Broaching Machine Specialties recorded 16 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 8-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 16 injuries, 1 illnesses shown on this page for Broaching Machine Specialties are sourced from its own 8 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 333511 - Molds for metal casting (except steel ingot) manufacturing.

DART Rate, Transparent Calculation (2024)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

1 DART incidents × 200,000 ÷ 37,109 hours worked = 5.39 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Broaching Machine Specialties (this establishment) 12.03 OSHA ITA Form 300A, 8-year avg
Industrial molds (except steel ingot) manufacturing industry avg 3.30 BLS IIF, NAICS 333511
Michigan state avg (all industries) 4.73 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Broaching Machine Specialties to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 10.8 5.4 1 1 0
2023 25.4 10.2 5 0 0
2022 5.1 0.0 1 0 0
2021 25.9 0.0 4 0 0
2020 0.0 0.0 0 0 0
2019 23.1 5.8 4 0 0
2018 5.8 0.0 1 0 0
2017 0.0 0.0 0 0 0

What this grade means for you

Use this grade as a relative read on Broaching Machine Specialties's reported OSHA injury record versus its Molds for metal casting (except steel ingot) manufacturing peers, not a verdict on whether any single site is safe today.

  • At 365% of the Molds for metal casting (except steel ingot) manufacturing benchmark, Broaching Machine Specialties reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
  • Judge this record against the wider Molds for metal casting (except steel ingot) manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Broaching Machine Specialties's safety grade?
Broaching Machine Specialties has a safety grade of F (Failing Safety Record). This grade is based on their average Total Case Rate (TCR) of 12.0 compared to the BLS industry benchmark of 3.3 for Molds for metal casting (except steel ingot) manufacturing.
How many injuries has Broaching Machine Specialties reported?
Broaching Machine Specialties has reported 16 total injuries and 0 fatalities across 8 years of OSHA data (2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within Michigan, and by nearby establishments in Novi - a different peer set than the category browse links below.

Similar TCR (~12.0)

Similar size (~19 workers)

Nearby in Novi

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.