Offset printing (except books, printing grey goods) · District of Columbia
Bureau of Engraving and Printing DCF
Washington, D.C., DC · ~1,071 workers · 2 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 1.6
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Bureau of Engraving and Printing DCF runs at 49% of its industry's injury rate - far safer than the typical Offset printing (except books, printing grey goods) workplace, earning a grade A.
- A
- Excellent Safety Record
- 1.6
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 26
- recordable injuries tracked
Grade compares Bureau of Engraving and Printing DCF's OSHA Total Case Rate of 1.6 to the Offset printing (except books, printing grey goods) BLS benchmark of 3.3 (49% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Bureau of Engraving and Printing DCF's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Bureau of Engraving and Printing DCF falls in its industry
2,259 Offset printing (except books, establishmentsSafer than 64% of graded establishments in this industry, whose median TCR is 2.3.
Trend analysis for Bureau of Engraving and Printing DCF
Between 2023 and 2024, Bureau of Engraving and Printing DCF's Total Case Rate held roughly steady from 1.6 to 1.6 recordable injuries per 100 full-time workers, a 3% increase across 1 year of OSHA reporting.
The safest year on record was 2023, at a TCR of 1.6, while 2024 saw the highest rate, at 1.6, a spread of 0.0 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, Bureau of Engraving and Printing DCF recorded 26 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 26 injuries, 1 illnesses shown on this page for Bureau of Engraving and Printing DCF are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 323111 - Offset printing (except books, printing grey goods).
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
14 DART incidents × 200,000 ÷ 1,695,930 hours worked = 1.65 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Bureau of Engraving and Printing DCF (this establishment) | 1.63 | OSHA ITA Form 300A, 2-year avg |
| Commercial flexographic printing (except books) industry avg | 3.30 | BLS IIF, NAICS 323111 |
| District of Columbia state avg (all industries) | 3.42 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Bureau of Engraving and Printing DCF to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 14 reportable incidents · 13 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 13 reportable incidents · 13 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 1.6 | 1.6 | 13 | 1 | 0 |
| 2023 | 1.6 | 1.5 | 13 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Bureau of Engraving and Printing DCF's reported OSHA injury record, strong versus its Offset printing (except books, printing grey goods) peers, but not a guarantee about any single site today.
- At 49% of the Offset printing (except books, printing grey goods) benchmark, Bureau of Engraving and Printing DCF reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Offset printing (except books, printing grey goods) sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Bureau of Engraving and Printing DCF's safety grade?
How many injuries has Bureau of Engraving and Printing DCF reported?
Similar Employers
Matched by safety record across the industry, by workforce size within District of Columbia, and by nearby establishments in Washington, D.C. - a different peer set than the category browse links below.
Similar TCR (~1.6)
Similar size (~1,071 workers)
Nearby in Washington, D.C.
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.