Hardening (i.e., heat treating) metals and metal products for the trade · Alabama
CMC Impact Metals Pell City
Pell City, AL · ~58 workers · 9 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 0.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
CMC Impact Metals Pell City runs at 28% of its industry's injury rate - far safer than the typical Hardening (i.e., heat treating) metals and metal products for the trade workplace, earning a grade A.
CMC Impact Metals Pell City: 0.9 TCR = 28% of Hardening (i.e., heat treating) metals and metal products for the trade BLS 3.3 · 9y Form 300A (see methodology below)
CMC Impact Metals Pell City safety composite
CMC Impact Metals Pell City scores strongest on total case rate (tcr) (safer than 95% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
78/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- A 0.92 per 100 workers
Safer than 95% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 79% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
CMC Impact Metals Pell City held a steady TCR band
CMC Impact Metals Pell City's TCR held near 0.0 from 0.0 in 2016 to 0.0 in 2024. Peak filing year was 2021 at 5.2 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).
2016=0.0 · 2017=0.0 · 2018=0.0 · 2019=3.1 · 2020=0.0 · 2021=5.2 · 2022=0.0 · 2023=0.0 · 2024=0.0
OSHA ITA Form 300A scorecard
Establishment book 332811 · Pell City, AL AT/BELOW-IND · SMALL
Grade A · TCR 0.9 · 28% of ind
- DART 0.0 DART
- RANK P95
- PHOTO Tool Dynamics (Colum…
- BOOK 9y book
- INJ 5 inj
- SIZE ~58 FTE
Nearest TCR peer: Tool Dynamics (Columbus) (0.0 TCR gap)
Read with this employer → · Industry book → · Alabama employers → · Look up another →
CMC Impact Metals Pell City in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Penna Flame In
Penna Flame Industries
1 TCR
- This site
CMC Impact Metals Pell City
0.9 TCR
- Tool Dynamics
Tool Dynamics (Columbus)
0.9 TCR
- Bodycote Therm
Bodycote Thermal Processing, Inc. - New Berlin
0.8 TCR
- Fremont Heat T
Fremont Heat Treat Division
0.8 TCR
What this shows CMC Impact Metals Pell City averages 0.9 TCR (28% of the Hardening (i.e., heat treating) metals and metal products for the trade BLS benchmark).
CMC Impact Metals Pell City TCR series: 2016=0 · 2017=0 · 2018=0 · 2019=3.1 · 2020=0 · 2021=5.2 · 2022=0 · 2023=0 · 2024=0 · BLS 3.3
Where CMC Impact Metals Pell City falls in its industry
248 Hardening (i.e., heat treating establishmentsSafer than 95% of graded establishments in this industry, whose median TCR is 4.2.
CMC Impact Metals Pell City has more employees than the Hardening (i.e., heat treating) metals a median and a lower injury rate than the industry's median TCR of 4.2. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2022 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2021 | 5.2 | 3.4 | 3 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 3.1 | 3.1 | 2 | 0 | 0 |
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2016 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332811 · AL · Pell City
248 Hardening (i.e., heat treating) metals and metal products for the trade employers nationwide with a credible TCR · 7,418 rated employers in Alabama with headcount on file · 44 employers in Pell City, AL · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Tool Dynamics (Columbus) | 0.9 TCR |
| NAICS-TCR | Penna Flame Industries | 1.0 TCR |
| NAICS-TCR | Bodycote Thermal Processing, Inc. - New Berlin | 0.8 TCR |
| NAICS-TCR | Fremont Heat Treat Division | 0.8 TCR |
| STATE-SIZE | Fair Knoll Hatchery | 58 FTE |
| STATE-SIZE | Southern Operations Center | 58 FTE |
| STATE-SIZE | Professional Building Services | 58 FTE |
| STATE-SIZE | 105176 - Enviva Wood Pellet Plant EPC Epes, AL | 58 FTE |
| CITY-NEAR | Eissmann Group Automotive | 560 FTE |
| CITY-NEAR | WKW Erbsloeh North America, LLC | 465 FTE |
| CITY-NEAR | Col Robert L Howard | 371 FTE |
| CITY-NEAR | WM 5113 | 348 FTE |
| NAT-TCR | CMC Rebar Brighton | 0.9 TCR |
| NAT-TCR | Starcon @ Marathon Canton | 0.9 TCR |
| NAT-TCR | Vcf 826 | 0.9 TCR |
| NAT-TCR | Vcf 093 | 0.9 TCR |
| NAT-SIZE | VDF Crown Point | 58 FTE |
| NAT-SIZE | CMC Rebar Gastonia | 58 FTE |
| NAT-SIZE | Plant 1 | 58 FTE |
| NAT-SIZE | L.S. Lee, Inc./PA Construction | 58 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.