Poultry feeds, supplements, and concentrates manufacturing · Georgia
Crystal Feeds
Oakwood, GA · ~29 workers · 3 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 7.4
- Avg TCR
- 3.9
- Industry avg
- 0
- Fatalities
The verdict
Crystal Feeds runs at 191% of its industry's injury rate - more dangerous than the typical Poultry feeds, supplements, and concentrates manufacturing workplace, earning a grade D.
- D
- Poor Safety Record
- 7.4
- avg TCR · per 100 workers
- 3.9
- industry benchmark (BLS)
- 3
- recordable injuries tracked
Grade compares Crystal Feeds's OSHA Total Case Rate of 7.4 to the Poultry feeds, supplements, and concentrates manufacturing BLS benchmark of 3.9 (191% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Crystal Feeds's yearly Total Case Rate, against the 3.9 industry benchmark.
Where Crystal Feeds falls in its industry
832 Poultry feeds, supplements, an establishmentsSafer than 12% of graded establishments in this industry, whose median TCR is 3.2.
Narrower to Georgia alone (the establishments it most directly competes with for workers and contracts): ranked #36 safest of 41 Poultry feeds, supplements, an employers in Georgia.
Trend analysis for Crystal Feeds
Between 2019 and 2023, Crystal Feeds's Total Case Rate worsened from 3.6 to 18.7 recordable injuries per 100 full-time workers, a 413% increase across 4 years of OSHA reporting.
The safest year on record was 2020, at a TCR of 0.0, while 2023 saw the highest rate, at 18.7, a spread of 18.7 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 3 reporting years, Crystal Feeds recorded 3 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 3 injuries, 1 illnesses shown on this page for Crystal Feeds are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 311119 - Poultry feeds, supplements, and concentrates manufacturing.
DART Rate, Transparent Calculation (2023)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
3 DART incidents × 200,000 ÷ 32,131 hours worked = 18.67 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Crystal Feeds (this establishment) | 7.44 | OSHA ITA Form 300A, 3-year avg |
| Grain Mill Animal Feed industry avg | 3.90 | BLS IIF, NAICS 311119 |
| Georgia state avg (all industries) | 4.11 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Crystal Feeds to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2023: 3 reportable incidents · 2 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 18.7 | 18.7 | 2 | 1 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 3.6 | 3.6 | 1 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Crystal Feeds's reported OSHA injury record versus its Poultry feeds, supplements, and concentrates manufacturing peers, not a verdict on whether any single site is safe today.
- At 191% of the Poultry feeds, supplements, and concentrates manufacturing benchmark, Crystal Feeds reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Poultry feeds, supplements, and concentrates manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Crystal Feeds's safety grade?
How many injuries has Crystal Feeds reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Georgia, and by nearby establishments in Oakwood - a different peer set than the category browse links below.
Similar TCR (~7.4)
Similar size (~29 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.