Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing · Indiana
General Stamping and Metal Works
South Bend, IN · ~307 workers · 2 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 10.3
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
General Stamping and Metal Works runs at 311% of its industry's injury rate - far more dangerous than the typical Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing workplace, earning a grade F.
General Stamping and Metal Works: 10.3 TCR = 311% of Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing BLS 3.3 · 2y Form 300A (see methodology below)
General Stamping and Metal Works safety composite
General Stamping and Metal Works scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on dart rate (safer than 3%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
18/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 10.26 per 100 workers
Safer than 10% of industry peers
- DART rate
- F 10.46 per 100 workers
Safer than 3% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
General Stamping and Metal Works: 8.9 → 11.6 TCR
Peak year 2020 @ 11.6 TCR · DART/TCR 1.02× in 2020
General Stamping and Metal Works's TCR rose 2.7 from 8.9 in 2019 to 11.6 in 2020. In 2020, DART was 1.02× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332313 · South Bend, IN ABOVE-IND · MID
Grade F · TCR 10.3 · 311% of ind
- DART 10.5 DART
- RANK #10/11
- PHOTO Choctaw Defense Manu…
- BOOK 2y book
- INJ 42 inj
- SIZE ~307 FTE
Nearest TCR peer: Choctaw Defense Manufacturing Contractor - Hugo (0.0 TCR gap)
Read with this employer → · Industry book → · Indiana employers → · Look up another →
General Stamping and Metal Works in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
General Stamping and Metal Works
10.3 TCR
- Choctaw Defens
Choctaw Defense Manufacturing Contractor - Hugo
10.3 TCR
- ITW Building C
ITW Building Components Group Inc - Litchfield
10.3 TCR
- Ottenweller Co
Ottenweller Company, Inc. Fort Wayne Headquarters
10.3 TCR
- US573 US Tray
US573 US Tray
10.3 TCR
What this shows General Stamping and Metal Works averages 10.3 TCR (311% of the Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing BLS benchmark).
General Stamping and Metal Works TCR series: 2019=8.9 · 2020=11.6 · BLS 3.3
Where General Stamping and Metal Works falls in its industry
449 Plate work (e.g., bending, cut establishmentsSafer than 10% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to Indiana alone (the establishments it most directly competes with for workers and contracts): ranked #10 safest of 11 Plate work (e.g., bending, cut employers in Indiana.
General Stamping and Metal Works has more employees than the Plate work (e.g., bending, cutting, punc median and a higher injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2020 | 11.6 | 10.5 | 22 | 8 | 0 |
| 2019 | 8.9 | 7.1 | 20 | 14 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332313 · IN · South Bend
449 Plate work (e.g., bending, cutting, punching, shaping, welding), fabricated metal, manufacturing employers nationwide with a credible TCR · 12,750 rated employers in Indiana with headcount on file · 318 employers in South Bend, IN · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Choctaw Defense Manufacturing Contractor - Hugo | 10.3 TCR |
| NAICS-TCR | ITW Building Components Group Inc - Litchfield | 10.3 TCR |
| NAICS-TCR | Ottenweller Company, Inc. Fort Wayne Headquarters | 10.3 TCR |
| NAICS-TCR | US573 US Tray | 10.3 TCR |
| STATE-SIZE | Lear - Portage | 307 FTE |
| STATE-SIZE | Presort Services- Indianapolis | 307 FTE |
| STATE-SIZE | Paladin, Inc. | 307 FTE |
| STATE-SIZE | Mel Kay | 308 FTE |
| CITY-NEAR | Memorial Hospital South Bend | 2,914 FTE |
| CITY-NEAR | St. Joseph County | 1,298 FTE |
| CITY-NEAR | Fourwinds Casino South Bend | 1,021 FTE |
| CITY-NEAR | Honeywell IN08 | 810 FTE |
| NAT-TCR | HPW - Hyatt Place Durham/Southpoint | 10.3 TCR |
| NAT-TCR | Omahaline Hydraulics | 10.3 TCR |
| NAT-TCR | Museum of the Bible | 10.3 TCR |
| NAT-TCR | 451 Portland, or | 10.3 TCR |
| NAT-SIZE | Cardone Plant 49 | 307 FTE |
| NAT-SIZE | HellermannTyton- Good Hope | 307 FTE |
| NAT-SIZE | Cleveland Tn Cdpa | 307 FTE |
| NAT-SIZE | Los Angeles Police Department, Security Services Division | 307 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.