Food choppers, grinders, mixers, and slicers (i.e., food manufacturing-type) manufacturing · South Dakota

Grand Prairie Foods 1509 Facility

Sioux Falls, SD · ~34 workers · 7 years of OSHA Injury Tracking Application data.

F
Failing Safety Record
8.3
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

Grand Prairie Foods 1509 Facility runs at 250% of its industry's injury rate - far more dangerous than the typical Food choppers, grinders, mixers, and slicers (i.e., food manufacturing-type) manufacturing workplace, earning a grade F.

F
Failing Safety Record
8.3
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
30
recordable injuries tracked

Grade compares Grand Prairie Foods 1509 Facility's OSHA Total Case Rate of 8.3 to the Food choppers, grinders, mixers, and slicers (i.e., food manufacturing-type) manufacturing BLS benchmark of 3.3 (250% of benchmark) across 7 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

Grand Prairie Foods 1509 Facility's yearly Total Case Rate, against the 3.3 industry benchmark.

-1,00001,0002,0003,000 2017201920202021202220232024 4.93.3 Industry benchmarkGrand Prairie Foods 1509 Facility TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 333241.

Where Grand Prairie Foods 1509 Facility falls in its industry

228 Food choppers, grinders, mixer establishments

Safer than 10% of graded establishments in this industry, whose median TCR is 2.9.

More dangerous than peersSafer than peers

Trend analysis for Grand Prairie Foods 1509 Facility

Between 2017 and 2024, Grand Prairie Foods 1509 Facility's Total Case Rate held roughly steady from 0.0 to 4.9 recordable injuries per 100 full-time workers, a 0% change across 7 years of OSHA reporting.

The safest year on record was 2017, at a TCR of 0.0, while 2021 saw the highest rate, at 13.7, a spread of 13.7 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 6 reporting years, Grand Prairie Foods 1509 Facility recorded 21 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 6-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 30 injuries shown on this page for Grand Prairie Foods 1509 Facility are sourced from its own 7 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 333241 - Food choppers, grinders, mixers, and slicers (i.e., food manufacturing-type) manufacturing.

DART Rate, Transparent Calculation (2024)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

2 DART incidents × 200,000 ÷ 81,120 hours worked = 4.93 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Grand Prairie Foods 1509 Facility (this establishment) 8.25 OSHA ITA Form 300A, 7-year avg
Meat grinders, food-type, manufacturing industry avg 3.30 BLS IIF, NAICS 333241
South Dakota state avg (all industries) 5.84 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Grand Prairie Foods 1509 Facility to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 4.9 4.9 2 0 0
2023 10.6 10.6 6 0 0
2022 9.9 6.0 5 0 0
2021 13.7 3.4 4 0 0
2020 2500.0 555.6 9 0 0
2019 10.4 5.2 4 0 0
2017 0.0 0.0 0 0 0

What this grade means for you

Use this grade as a relative read on Grand Prairie Foods 1509 Facility's reported OSHA injury record versus its Food choppers, grinders, mixers, and slicers (i.e., food manufacturing-type) manufacturing peers, not a verdict on whether any single site is safe today.

  • At 250% of the Food choppers, grinders, mixers, and slicers (i.e., food manufacturing-type) manufacturing benchmark, Grand Prairie Foods 1509 Facility reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
  • Judge this record against the wider Food choppers, grinders, mixers, and slicers (i.e., food manufacturing-type) manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Grand Prairie Foods 1509 Facility's safety grade?
Grand Prairie Foods 1509 Facility has a safety grade of F (Failing Safety Record). This grade is based on their average Total Case Rate (TCR) of 8.3 compared to the BLS industry benchmark of 3.3 for Food choppers, grinders, mixers, and slicers (i.e., food manufacturing-type) manufacturing.
How many injuries has Grand Prairie Foods 1509 Facility reported?
Grand Prairie Foods 1509 Facility has reported 30 total injuries and 0 fatalities across 7 years of OSHA data (2024, 2023, 2022, 2021, 2020, 2019, 2017). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within South Dakota, and by nearby establishments in Sioux Falls - a different peer set than the category browse links below.

Similar TCR (~8.3)

Similar size (~34 workers)

Nearby in Sioux Falls

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.