Gear cutting and finishing machines, metalworking, manufacturing · Wisconsin
Marine Associates
Hudson, WI · ~71 workers · 5 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.6
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Marine Associates runs at 140% of its industry's injury rate - more dangerous than the typical Gear cutting and finishing machines, metalworking, manufacturing workplace, earning a grade D.
- D
- Poor Safety Record
- 4.6
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 13
- recordable injuries tracked
Grade compares Marine Associates's OSHA Total Case Rate of 4.6 to the Gear cutting and finishing machines, metalworking, manufacturing BLS benchmark of 3.3 (140% of benchmark) across 5 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Marine Associates's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Marine Associates falls in its industry
429 Gear cutting and finishing mac establishmentsSafer than 31% of graded establishments in this industry, whose median TCR is 3.1.
Narrower to Wisconsin alone (the establishments it most directly competes with for workers and contracts): ranked #23 safest of 34 Gear cutting and finishing mac employers in Wisconsin.
Trend analysis for Marine Associates
Between 2017 and 2023, Marine Associates's Total Case Rate improved from 6.1 to 1.6 recordable injuries per 100 full-time workers, a 73% decrease across 6 years of OSHA reporting.
The safest year on record was 2023, at a TCR of 1.6, while 2020 saw the highest rate, at 8.9, a spread of 7.3 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 5 reporting years, Marine Associates recorded 13 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 5-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 13 injuries, 2 illnesses shown on this page for Marine Associates are sourced from its own 5 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 333517 - Gear cutting and finishing machines, metalworking, manufacturing.
DART Rate, Transparent Calculation (2023)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 124,266 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Marine Associates (this establishment) | 4.63 | OSHA ITA Form 300A, 5-year avg |
| Sheet metal forming machines manufacturing industry avg | 3.30 | BLS IIF, NAICS 333517 |
| Wisconsin state avg (all industries) | 4.92 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Marine Associates to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2023: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 5 reportable incidents · 3 injuries, 2 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 1.6 | 0.0 | 1 | 0 | 0 |
| 2020 | 8.9 | 1.8 | 3 | 2 | 0 |
| 2019 | 4.0 | 1.3 | 3 | 0 | 0 |
| 2018 | 2.6 | 2.6 | 2 | 0 | 0 |
| 2017 | 6.1 | 3.0 | 4 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Marine Associates's reported OSHA injury record versus its Gear cutting and finishing machines, metalworking, manufacturing peers, not a verdict on whether any single site is safe today.
- At 140% of the Gear cutting and finishing machines, metalworking, manufacturing benchmark, Marine Associates reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Gear cutting and finishing machines, metalworking, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Marine Associates's safety grade?
How many injuries has Marine Associates reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Wisconsin, and by nearby establishments in Hudson - a different peer set than the category browse links below.
Similar TCR (~4.6)
Similar size (~71 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.