Die sets for metal stamping presses manufacturing · Kansas
Marion Die & Fixture
Marion, KS · ~33 workers · 2 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 2.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Marion Die & Fixture runs at 89% of its industry's injury rate - about level with the typical Die sets for metal stamping presses manufacturing workplace, earning a grade C.
- C
- Average Safety Record
- 2.9
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 2
- recordable injuries tracked
Grade compares Marion Die & Fixture's OSHA Total Case Rate of 2.9 to the Die sets for metal stamping presses manufacturing BLS benchmark of 3.3 (89% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Marion Die & Fixture's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Marion Die & Fixture falls in its industry
424 Die sets for metal stamping pr establishmentsSafer than 52% of graded establishments in this industry, whose median TCR is 3.1.
Trend analysis for Marion Die & Fixture
Between 2019 and 2021, Marion Die & Fixture's Total Case Rate held roughly steady from 3.0 to 2.9 recordable injuries per 100 full-time workers, a 3% decrease across 2 years of OSHA reporting.
The safest year on record was 2021, at a TCR of 2.9, while 2019 saw the highest rate, at 3.0, a spread of 0.1 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, Marion Die & Fixture recorded 2 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 2 injuries shown on this page for Marion Die & Fixture are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 333514 - Die sets for metal stamping presses manufacturing.
DART Rate, Transparent Calculation (2021)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 69,309 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Marion Die & Fixture (this establishment) | 2.94 | OSHA ITA Form 300A, 2-year avg |
| Jigs and fixtures for use with machine tools manufacturing industry avg | 3.30 | BLS IIF, NAICS 333514 |
| Kansas state avg (all industries) | 4.51 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Marion Die & Fixture to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2021: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2021 | 2.9 | 0.0 | 1 | 0 | 0 |
| 2019 | 3.0 | 0.0 | 1 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Marion Die & Fixture's reported OSHA injury record, strong versus its Die sets for metal stamping presses manufacturing peers, but not a guarantee about any single site today.
- At 89% of the Die sets for metal stamping presses manufacturing benchmark, Marion Die & Fixture reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Die sets for metal stamping presses manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Marion Die & Fixture's safety grade?
How many injuries has Marion Die & Fixture reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Kansas, and by nearby establishments in Marion - a different peer set than the category browse links below.
Similar TCR (~2.9)
Similar size (~33 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.