Cast iron pipe and pipe fittings manufacturing · Utah
McWane Ductile Utah
Provo, UT · ~294 workers · 2 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 1.3
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
McWane Ductile Utah runs at 40% of its industry's injury rate - far safer than the typical Cast iron pipe and pipe fittings manufacturing workplace, earning a grade A.
- A
- Excellent Safety Record
- 1.3
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 8
- recordable injuries tracked
Grade compares McWane Ductile Utah's OSHA Total Case Rate of 1.3 to the Cast iron pipe and pipe fittings manufacturing BLS benchmark of 3.3 (40% of benchmark) across 2 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
McWane Ductile Utah's yearly Total Case Rate, against the 3.3 industry benchmark.
Where McWane Ductile Utah falls in its industry
281 Cast iron pipe and pipe fittin establishmentsSafer than 96% of graded establishments in this industry, whose median TCR is 7.2.
Trend analysis for McWane Ductile Utah
Between 2023 and 2024, McWane Ductile Utah's Total Case Rate improved from 1.9 to 0.8 recordable injuries per 100 full-time workers, a 57% decrease across 1 year of OSHA reporting.
The safest year on record was 2024, at a TCR of 0.8, while 2023 saw the highest rate, at 1.9, a spread of 1.1 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 2 reporting years, McWane Ductile Utah recorded 8 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 8 injuries shown on this page for McWane Ductile Utah are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331511 - Cast iron pipe and pipe fittings manufacturing.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 505,461 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| McWane Ductile Utah (this establishment) | 1.32 | OSHA ITA Form 300A, 2-year avg |
| Gray iron foundries industry avg | 3.30 | BLS IIF, NAICS 331511 |
| Utah state avg (all industries) | 4.77 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by McWane Ductile Utah to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 0.8 | 0.0 | 2 | 0 | 0 |
| 2023 | 1.9 | 1.9 | 6 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on McWane Ductile Utah's reported OSHA injury record, strong versus its Cast iron pipe and pipe fittings manufacturing peers, but not a guarantee about any single site today.
- At 40% of the Cast iron pipe and pipe fittings manufacturing benchmark, McWane Ductile Utah reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Cast iron pipe and pipe fittings manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is McWane Ductile Utah's safety grade?
How many injuries has McWane Ductile Utah reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Utah, and by nearby establishments in Provo - a different peer set than the category browse links below.
Similar TCR (~1.3)
Similar size (~294 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.