Sheet metal work (except stampings) manufacturing · New York
Southerntier Custom Fabricators, Inc.
Elmira, NY · ~159 workers · 6 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.0
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Southerntier Custom Fabricators, Inc. runs at 90% of its industry's injury rate - about level with the typical Sheet metal work (except stampings) manufacturing workplace, earning a grade C.
Southerntier Custom Fabricators, Inc.: 3.0 TCR = 90% of Sheet metal work (except stampings) manufacturing BLS 3.3 · 6y Form 300A (see methodology below)
Southerntier Custom Fabricators, Inc. safety composite
Southerntier Custom Fabricators, Inc. scores strongest on total case rate (tcr) (safer than 71% of same-industry peers) and weakest on dart rate (safer than 21%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
49/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 2.96 per 100 workers
Safer than 71% of industry peers
- DART rate
- F 4.66 per 100 workers
Safer than 21% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Southerntier Custom Fabricators, Inc.: 3.9 → 4.7 TCR
Peak year 2023 @ 5.5 TCR · DART/TCR 1.57× in 2024
Southerntier Custom Fabricators, Inc.'s TCR rose 0.8 from 3.9 in 2019 to 4.7 in 2024. Peak filing year was 2023 at 5.5 TCR. In 2024, DART was 1.57× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332322 · Elmira, NY AT/BELOW-IND · MID
Grade C · TCR 3.0 · 90% of ind
- DART 4.7 DART
- RANK #19/58
- PHOTO Metal Finishing Syst…
- BOOK 6y book
- INJ 28 inj
- SIZE ~159 FTE
Nearest TCR peer: Metal Finishing Systems Inc. (0.0 TCR gap)
Read with this employer → · Industry book → · New York employers → · Look up another →
Southerntier Custom Fabricators, Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Southerntier Custom Fabricators, Inc.
3 TCR
- Metal Finishin
Metal Finishing Systems Inc.
3 TCR
- George Koch So
George Koch Sons - Evansville
3 TCR
- Tenere Metals
Tenere Metals Division Osceola
3 TCR
- Automation Gua
Automation Guarding Systems
3 TCR
What this shows Southerntier Custom Fabricators, Inc. averages 3.0 TCR (90% of the Sheet metal work (except stampings) manufacturing BLS benchmark).
Southerntier Custom Fabricators, Inc. TCR series: 2019=3.9 · 2020=2.3 · 2021=1.3 · 2022=0.1 · 2023=5.5 · 2024=4.7 · BLS 3.3
Where Southerntier Custom Fabricators, Inc. falls in its industry
1,158 Sheet metal work (except stamp establishmentsSafer than 71% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to New York alone (the establishments it most directly competes with for workers and contracts): ranked #19 safest of 58 Sheet metal work (except stamp employers in New York.
Southerntier Custom Fabricators, Inc. has more employees than the Sheet metal work (except stampings) manu median and a lower injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 4.7 | 4.7 | 7 | 0 | 0 |
| 2023 | 5.5 | 2.1 | 8 | 0 | 0 |
| 2022 | 0.1 | 0.1 | 2 | 0 | 0 |
| 2021 | 1.3 | 0.6 | 2 | 0 | 0 |
| 2020 | 2.3 | 0.0 | 3 | 0 | 0 |
| 2019 | 3.9 | 0.7 | 6 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332322 · NY · Elmira
1,158 Sheet metal work (except stampings) manufacturing employers nationwide with a credible TCR · 21,008 rated employers in New York with headcount on file · 88 employers in Elmira, NY · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Metal Finishing Systems Inc. | 3.0 TCR |
| NAICS-TCR | George Koch Sons - Evansville | 3.0 TCR |
| NAICS-TCR | Tenere Metals Division Osceola | 3.0 TCR |
| NAICS-TCR | Automation Guarding Systems | 3.0 TCR |
| STATE-SIZE | NORTHPORT Powerstation-NY66 | 159 FTE |
| STATE-SIZE | New York Office | 159 FTE |
| STATE-SIZE | 198 Grumman Rd | 159 FTE |
| STATE-SIZE | Rochester Davis-Fetch Corp. | 159 FTE |
| CITY-NEAR | Arnot Ogden Medical Center | 2,497 FTE |
| CITY-NEAR | The Arc of Chemung-Schuyler | 556 FTE |
| CITY-NEAR | St. Joseph's Hospital | 424 FTE |
| CITY-NEAR | DePuy Synthes Horseheads | 388 FTE |
| NAT-TCR | Culberson Hospital | 3.0 TCR |
| NAT-TCR | Marble Falls Main Station | 3.0 TCR |
| NAT-TCR | Shop | 3.0 TCR |
| NAT-TCR | Bridgeport WWTP | 3.0 TCR |
| NAT-SIZE | DALB, Inc | 159 FTE |
| NAT-SIZE | Manheim | 159 FTE |
| NAT-SIZE | Tejas Tubular Products - Tubing | 159 FTE |
| NAT-SIZE | Reynolds Excavation | 159 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.