Metal motor vehicle body parts stamping · Nebraska
Tri-Con Industries Ltd, Stamping Plant
Lincoln, NE · ~102 workers · 2 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 3.0
- Avg TCR
- 5.4
- Industry avg
- 0
- Fatalities
The verdict
Tri-Con Industries Ltd, Stamping Plant runs at 55% of its industry's injury rate - safer than the typical Metal motor vehicle body parts stamping workplace, earning a grade B.
- B
- Good Safety Record
- 3.0
- avg TCR · per 100 workers
- 5.4
- industry benchmark (BLS)
- 6
- recordable injuries tracked
Grade compares Tri-Con Industries Ltd, Stamping Plant's OSHA Total Case Rate of 3.0 to the Metal motor vehicle body parts stamping BLS benchmark of 5.4 (55% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Tri-Con Industries Ltd, Stamping Plant's yearly Total Case Rate, against the 5.4 industry benchmark.
Where Tri-Con Industries Ltd, Stamping Plant falls in its industry
527 Metal motor vehicle body parts establishmentsSafer than 72% of graded establishments in this industry, whose median TCR is 4.5.
Trend analysis for Tri-Con Industries Ltd, Stamping Plant
Between 2019 and 2020, Tri-Con Industries Ltd, Stamping Plant's Total Case Rate improved from 3.7 to 2.2 recordable injuries per 100 full-time workers, a 39% decrease across 1 year of OSHA reporting.
The safest year on record was 2020, at a TCR of 2.2, while 2019 saw the highest rate, at 3.7, a spread of 1.4 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, Tri-Con Industries Ltd, Stamping Plant recorded 6 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 6 injuries shown on this page for Tri-Con Industries Ltd, Stamping Plant are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 336370 - Metal motor vehicle body parts stamping.
DART Rate, Transparent Calculation (2020)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
1 DART incidents × 200,000 ÷ 178,685 hours worked = 1.12 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Tri-Con Industries Ltd, Stamping Plant (this establishment) | 2.96 | OSHA ITA Form 300A, 2-year avg |
| Job stampings, automotive, metal, manufacturing industry avg | 5.40 | BLS IIF, NAICS 336370 |
| Nebraska state avg (all industries) | 4.84 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Tri-Con Industries Ltd, Stamping Plant to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2020: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2020 | 2.2 | 1.1 | 2 | 0 | 0 |
| 2019 | 3.7 | 0.9 | 4 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Tri-Con Industries Ltd, Stamping Plant's reported OSHA injury record, strong versus its Metal motor vehicle body parts stamping peers, but not a guarantee about any single site today.
- At 55% of the Metal motor vehicle body parts stamping benchmark, Tri-Con Industries Ltd, Stamping Plant reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Metal motor vehicle body parts stamping sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Tri-Con Industries Ltd, Stamping Plant's safety grade?
How many injuries has Tri-Con Industries Ltd, Stamping Plant reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Nebraska, and by nearby establishments in Lincoln - a different peer set than the category browse links below.
Similar TCR (~3.0)
Similar size (~102 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.