Pressure treated lumber made from purchased lumber · Wisconsin
UFP Janesville, LLC
Janesville, WI · ~82 workers · 9 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.5
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
UFP Janesville, LLC runs at 138% of its industry's injury rate - more dangerous than the typical Pressure treated lumber made from purchased lumber workplace, earning a grade D.
- D
- Poor Safety Record
- 4.5
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 31
- recordable injuries tracked
Grade compares UFP Janesville, LLC's OSHA Total Case Rate of 4.5 to the Pressure treated lumber made from purchased lumber BLS benchmark of 3.3 (138% of benchmark) across 9 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
UFP Janesville, LLC's yearly Total Case Rate, against the 3.3 industry benchmark.
Where UFP Janesville, LLC falls in its industry
194 Pressure treated lumber made f establishmentsSafer than 44% of graded establishments in this industry, whose median TCR is 4.1.
Narrower to Wisconsin alone (the establishments it most directly competes with for workers and contracts): ranked #3 safest of 7 Pressure treated lumber made f employers in Wisconsin.
Trend analysis for UFP Janesville, LLC
Between 2016 and 2024, UFP Janesville, LLC's Total Case Rate held roughly steady from 0.0 to 5.4 recordable injuries per 100 full-time workers, a 0% change across 8 years of OSHA reporting.
The safest year on record was 2016, at a TCR of 0.0, while 2018 saw the highest rate, at 8.0, a spread of 8.0 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 9 reporting years, UFP Janesville, LLC recorded 31 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 9-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 31 injuries, 2 illnesses shown on this page for UFP Janesville, LLC are sourced from its own 9 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 321114 - Pressure treated lumber made from purchased lumber.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
4 DART incidents × 200,000 ÷ 147,306 hours worked = 5.43 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| UFP Janesville, LLC (this establishment) | 4.54 | OSHA ITA Form 300A, 9-year avg |
| Railroad ties (i.e., bridge, cross, switch) treating industry avg | 3.30 | BLS IIF, NAICS 321114 |
| Wisconsin state avg (all industries) | 4.92 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by UFP Janesville, LLC to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 3 reportable incidents · 2 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 5 reportable incidents · 4 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 5.4 | 5.4 | 4 | 0 | 0 |
| 2023 | 5.5 | 4.1 | 4 | 0 | 0 |
| 2022 | 4.8 | 3.6 | 4 | 0 | 0 |
| 2021 | 3.8 | 1.9 | 4 | 0 | 0 |
| 2020 | 2.6 | 0.9 | 3 | 0 | 0 |
| 2019 | 3.0 | 1.0 | 2 | 1 | 0 |
| 2018 | 8.0 | 6.6 | 6 | 0 | 0 |
| 2017 | 7.7 | 7.7 | 4 | 1 | 0 |
| 2016 | 0.0 | 0.0 | 0 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on UFP Janesville, LLC's reported OSHA injury record versus its Pressure treated lumber made from purchased lumber peers, not a verdict on whether any single site is safe today.
- At 138% of the Pressure treated lumber made from purchased lumber benchmark, UFP Janesville, LLC reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Pressure treated lumber made from purchased lumber sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is UFP Janesville, LLC's safety grade?
How many injuries has UFP Janesville, LLC reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Wisconsin, and by nearby establishments in Janesville - a different peer set than the category browse links below.
Similar TCR (~4.5)
Similar size (~82 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.