Architectural wall panels, precast concrete, manufacturing · Wisconsin
Wells - Great Lakes Sealants
Waukesha, WI · ~31 workers · 2 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 1.7
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Wells - Great Lakes Sealants runs at 52% of its industry's injury rate - safer than the typical Architectural wall panels, precast concrete, manufacturing workplace, earning a grade B.
- B
- Good Safety Record
- 1.7
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 1
- recordable injuries tracked
Grade compares Wells - Great Lakes Sealants's OSHA Total Case Rate of 1.7 to the Architectural wall panels, precast concrete, manufacturing BLS benchmark of 3.3 (52% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Wells - Great Lakes Sealants's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Wells - Great Lakes Sealants falls in its industry
875 Architectural wall panels, pre establishmentsSafer than 76% of graded establishments in this industry, whose median TCR is 4.1.
Narrower to Wisconsin alone (the establishments it most directly competes with for workers and contracts): ranked #3 safest of 29 Architectural wall panels, pre employers in Wisconsin.
Trend analysis for Wells - Great Lakes Sealants
Between 2023 and 2024, Wells - Great Lakes Sealants's Total Case Rate held roughly steady from 0.0 to 3.4 recordable injuries per 100 full-time workers, a 0% change across 1 year of OSHA reporting.
The safest year on record was 2023, at a TCR of 0.0, while 2024 saw the highest rate, at 3.4, a spread of 3.4 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 2 reporting years, Wells - Great Lakes Sealants recorded 1 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 1 injuries shown on this page for Wells - Great Lakes Sealants are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 327390 - Architectural wall panels, precast concrete, manufacturing.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
1 DART incidents × 200,000 ÷ 58,557 hours worked = 3.42 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Wells - Great Lakes Sealants (this establishment) | 1.71 | OSHA ITA Form 300A, 2-year avg |
| Concrete products, precast (except block, brick and pipe), manufacturing industry avg | 3.30 | BLS IIF, NAICS 327390 |
| Wisconsin state avg (all industries) | 4.92 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Wells - Great Lakes Sealants to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 3.4 | 3.4 | 1 | 0 | 0 |
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Wells - Great Lakes Sealants's reported OSHA injury record, strong versus its Architectural wall panels, precast concrete, manufacturing peers, but not a guarantee about any single site today.
- At 52% of the Architectural wall panels, precast concrete, manufacturing benchmark, Wells - Great Lakes Sealants reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Architectural wall panels, precast concrete, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Wells - Great Lakes Sealants's safety grade?
How many injuries has Wells - Great Lakes Sealants reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Wisconsin, and by nearby establishments in Waukesha - a different peer set than the category browse links below.
Similar TCR (~1.7)
Similar size (~31 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.