Plastics coating of textiles and apparel · Massachusetts
Worthen Industries Clinton
Clinton, MA · ~20 workers · 7 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 7.7
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Worthen Industries Clinton runs at 233% of its industry's injury rate - far more dangerous than the typical Plastics coating of textiles and apparel workplace, earning a grade F.
- F
- Failing Safety Record
- 7.7
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 12
- recordable injuries tracked
Grade compares Worthen Industries Clinton's OSHA Total Case Rate of 7.7 to the Plastics coating of textiles and apparel BLS benchmark of 3.3 (233% of benchmark) across 7 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Worthen Industries Clinton's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Worthen Industries Clinton falls in its industry
84 Plastics coating of textiles a establishmentsSafer than 11% of graded establishments in this industry, whose median TCR is 3.4.
Narrower to Massachusetts alone (the establishments it most directly competes with for workers and contracts): ranked #9 safest of 10 Plastics coating of textiles a employers in Massachusetts.
Trend analysis for Worthen Industries Clinton
Between 2018 and 2024, Worthen Industries Clinton's Total Case Rate worsened from 18.6 to 21.1 recordable injuries per 100 full-time workers, a 14% increase across 6 years of OSHA reporting.
The safest year on record was 2019, at a TCR of 0.0, while 2024 saw the highest rate, at 21.1, a spread of 21.1 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 7 reporting years, Worthen Industries Clinton recorded 12 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 7-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 12 injuries shown on this page for Worthen Industries Clinton are sourced from its own 7 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 313320 - Plastics coating of textiles and apparel.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
5 DART incidents × 200,000 ÷ 47,278 hours worked = 21.15 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Worthen Industries Clinton (this establishment) | 7.69 | OSHA ITA Form 300A, 7-year avg |
| Vinyl coated fabrics manufacturing industry avg | 3.30 | BLS IIF, NAICS 313320 |
| Massachusetts state avg (all industries) | 4.94 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Worthen Industries Clinton to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 5 reportable incidents · 5 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 21.1 | 21.1 | 5 | 0 | 0 |
| 2023 | 4.0 | 4.0 | 1 | 0 | 0 |
| 2022 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2021 | 4.9 | 0.0 | 1 | 0 | 0 |
| 2020 | 5.1 | 5.1 | 1 | 0 | 0 |
| 2019 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2018 | 18.6 | 18.6 | 4 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Worthen Industries Clinton's reported OSHA injury record versus its Plastics coating of textiles and apparel peers, not a verdict on whether any single site is safe today.
- At 233% of the Plastics coating of textiles and apparel benchmark, Worthen Industries Clinton reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Plastics coating of textiles and apparel sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Worthen Industries Clinton's safety grade?
How many injuries has Worthen Industries Clinton reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Massachusetts, and by nearby establishments in Clinton - a different peer set than the category browse links below.
Similar TCR (~7.7)
Similar size (~20 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.