Forgings made from purchased iron or steel, unfinished · Ohio

235 Tennyson Street

Cincinnati, OH · ~20 workers · 8 years of OSHA Injury Tracking Application data.

D
Poor Safety Record
5.8
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

235 Tennyson Street runs at 175% of its industry's injury rate - more dangerous than the typical Forgings made from purchased iron or steel, unfinished workplace, earning a grade D.

D
Poor Safety Record
5.8
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
9
recordable injuries tracked

Grade compares 235 Tennyson Street's OSHA Total Case Rate of 5.8 to the Forgings made from purchased iron or steel, unfinished BLS benchmark of 3.3 (175% of benchmark) across 8 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

235 Tennyson Street's yearly Total Case Rate, against the 3.3 industry benchmark.

-5051015 20162017201820192020202120222023 03.3 Industry benchmark235 Tennyson Street TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 332111.

Where 235 Tennyson Street falls in its industry

251 Forgings made from purchased i establishments

Safer than 37% of graded establishments in this industry, whose median TCR is 4.8.

More dangerous than peersSafer than peers

Narrower to Ohio alone (the establishments it most directly competes with for workers and contracts): ranked #28 safest of 42 Forgings made from purchased i employers in Ohio.

Trend analysis for 235 Tennyson Street

Between 2016 and 2023, 235 Tennyson Street's Total Case Rate improved from 4.0 to 0.0 recordable injuries per 100 full-time workers, a 100% decrease across 7 years of OSHA reporting.

The safest year on record was 2021, at a TCR of 0.0, while 2018 saw the highest rate, at 13.7, a spread of 13.7 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 8 reporting years, 235 Tennyson Street recorded 9 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 8-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 9 injuries shown on this page for 235 Tennyson Street are sourced from its own 8 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332111 - Forgings made from purchased iron or steel, unfinished.

DART Rate, Transparent Calculation (2023)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

0 DART incidents × 200,000 ÷ 33,203 hours worked = 0.00 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
235 Tennyson Street (this establishment) 5.79 OSHA ITA Form 300A, 8-year avg
Forgings made from purchased iron or steel, unfinished industry avg 3.30 BLS IIF, NAICS 332111
Ohio state avg (all industries) 3.90 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by 235 Tennyson Street to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2023 0.0 0.0 0 0 0
2022 12.3 6.2 2 0 0
2021 0.0 0.0 0 0 0
2020 6.4 0.0 1 0 0
2019 5.1 0.0 1 0 0
2018 13.7 4.6 3 0 0
2017 4.8 0.0 1 0 0
2016 4.0 4.0 1 0 0

What this grade means for you

Use this grade as a relative read on 235 Tennyson Street's reported OSHA injury record versus its Forgings made from purchased iron or steel, unfinished peers, not a verdict on whether any single site is safe today.

  • At 175% of the Forgings made from purchased iron or steel, unfinished benchmark, 235 Tennyson Street reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
  • Judge this record against the wider Forgings made from purchased iron or steel, unfinished sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is 235 Tennyson Street's safety grade?
235 Tennyson Street has a safety grade of D (Poor Safety Record). This grade is based on their average Total Case Rate (TCR) of 5.8 compared to the BLS industry benchmark of 3.3 for Forgings made from purchased iron or steel, unfinished.
How many injuries has 235 Tennyson Street reported?
235 Tennyson Street has reported 9 total injuries and 0 fatalities across 8 years of OSHA data (2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within Ohio, and by nearby establishments in Cincinnati - a different peer set than the category browse links below.

Similar TCR (~5.8)

Similar size (~20 workers)

Nearby in Cincinnati

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.