Tube, nonrigid plastics, manufacturing · New Mexico
Atkore United Poly Systems
Albuquerque, NM · ~83 workers · 2 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 8.0
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Atkore United Poly Systems runs at 242% of its industry's injury rate - far more dangerous than the typical Tube, nonrigid plastics, manufacturing workplace, earning a grade F.
- F
- Failing Safety Record
- 8.0
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 13
- recordable injuries tracked
Grade compares Atkore United Poly Systems's OSHA Total Case Rate of 8.0 to the Tube, nonrigid plastics, manufacturing BLS benchmark of 3.3 (242% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Atkore United Poly Systems's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Atkore United Poly Systems falls in its industry
220 Tube, nonrigid plastics, manuf establishmentsSafer than 11% of graded establishments in this industry, whose median TCR is 3.2.
Trend analysis for Atkore United Poly Systems
Between 2023 and 2024, Atkore United Poly Systems's Total Case Rate improved from 10.2 to 5.8 recordable injuries per 100 full-time workers, a 43% decrease across 1 year of OSHA reporting.
The safest year on record was 2024, at a TCR of 5.8, while 2023 saw the highest rate, at 10.2, a spread of 4.3 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, Atkore United Poly Systems recorded 13 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 13 injuries, 1 illnesses shown on this page for Atkore United Poly Systems are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 326121 - Tube, nonrigid plastics, manufacturing.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
4 DART incidents × 200,000 ÷ 171,398 hours worked = 4.67 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Atkore United Poly Systems (this establishment) | 8.00 | OSHA ITA Form 300A, 2-year avg |
| Profile shapes (e.g., rod, tube), nonrigid plastics, manufacturing industry avg | 3.30 | BLS IIF, NAICS 326121 |
| New Mexico state avg (all industries) | 5.12 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Atkore United Poly Systems to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 5 reportable incidents · 4 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 9 reportable incidents · 9 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 5.8 | 4.7 | 4 | 1 | 0 |
| 2023 | 10.2 | 3.4 | 9 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Atkore United Poly Systems's reported OSHA injury record versus its Tube, nonrigid plastics, manufacturing peers, not a verdict on whether any single site is safe today.
- At 242% of the Tube, nonrigid plastics, manufacturing benchmark, Atkore United Poly Systems reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Tube, nonrigid plastics, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Atkore United Poly Systems's safety grade?
How many injuries has Atkore United Poly Systems reported?
Similar Employers
Matched by safety record across the industry, by workforce size within New Mexico, and by nearby establishments in Albuquerque - a different peer set than the category browse links below.
Similar TCR (~8.0)
Similar size (~83 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.