Cast iron pipe and pipe fittings manufacturing · North Carolina
Charlotte Pipe and Foundry
Charlotte, NC · ~503 workers · 8 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.8
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Charlotte Pipe and Foundry runs at 114% of its industry's injury rate - about level with the typical Cast iron pipe and pipe fittings manufacturing workplace, earning a grade C.
Charlotte Pipe and Foundry: 3.8 TCR = 114% of Cast iron pipe and pipe fittings manufacturing BLS 3.3 · 8y Form 300A (see methodology below)
Charlotte Pipe and Foundry safety composite
Charlotte Pipe and Foundry scores strongest on total case rate (tcr) (safer than 78% of same-industry peers) and weakest on fatalities (safer than 52%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
64/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- B 3.75 per 100 workers
Safer than 78% of industry peers
- DART rate
- C 2.6 per 100 workers
Safer than 57% of industry peers
- Fatalities
- D 0
Safer than 52% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Charlotte Pipe and Foundry: 2.0 → 4.6 TCR
Peak year 2019 @ 5.8 TCR · DART/TCR 0.69× in 2023
Charlotte Pipe and Foundry's TCR rose 2.5 from 2.0 in 2016 to 4.6 in 2023. Peak filing year was 2019 at 5.8 TCR. In 2023, DART was 0.69× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 331511 · Charlotte, NC ABOVE-IND · MID
Grade C · TCR 3.8 · 114% of ind
- DART 2.6 DART
- RANK #2/4
- PHOTO INTAT Precision, Inc.
- BOOK 8y book
- INJ 153 inj
- SIZE ~503 FTE
Nearest TCR peer: INTAT Precision, Inc. (0.0 TCR gap)
Read with this employer → · Industry book → · North Carolina employers → · Look up another →
Charlotte Pipe and Foundry in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Goldens' Found
Goldens' Foundry and Machine Company (Columbus)
3.9 TCR
- This site
Charlotte Pipe and Foundry
3.8 TCR
- INTAT Precisio
INTAT Precision, Inc.
3.8 TCR
- Avalon Precisi
Avalon Precision Casting
3.7 TCR
- Asama Coldwate
Asama Coldwater Mfg.inc
3.7 TCR
What this shows Charlotte Pipe and Foundry averages 3.8 TCR (114% of the Cast iron pipe and pipe fittings manufacturing BLS benchmark).
Charlotte Pipe and Foundry TCR series: 2016=2 · 2017=4.7 · 2018=4 · 2019=5.8 · 2020=4 · 2021=2.5 · 2022=2.4 · 2023=4.6 · BLS 3.3
Where Charlotte Pipe and Foundry falls in its industry
272 Cast iron pipe and pipe fittin establishmentsSafer than 78% of graded establishments in this industry, whose median TCR is 7.2.
Narrower to North Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #2 safest of 4 Cast iron pipe and pipe fittin employers in North Carolina.
Charlotte Pipe and Foundry has more employees than the Cast iron pipe and pipe fittings manufac median and a lower injury rate than the industry's median TCR of 7.2. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 4.6 | 2.6 | 28 | 0 | 0 |
| 2022 | 2.4 | 2.0 | 12 | 1 | 0 |
| 2021 | 2.5 | 2.1 | 13 | 1 | 0 |
| 2020 | 4.0 | 3.5 | 21 | 0 | 0 |
| 2019 | 5.8 | 3.5 | 30 | 2 | 0 |
| 2018 | 4.0 | 3.3 | 22 | 0 | 0 |
| 2017 | 4.7 | 2.0 | 21 | 2 | 0 |
| 2016 | 2.0 | 0.7 | 6 | 3 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
331511 · NC · Charlotte
272 Cast iron pipe and pipe fittings manufacturing employers nationwide with a credible TCR · 16,981 rated employers in North Carolina with headcount on file · 2,058 employers in Charlotte, NC · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | INTAT Precision, Inc. | 3.8 TCR |
| NAICS-TCR | Avalon Precision Casting | 3.7 TCR |
| NAICS-TCR | Asama Coldwater Mfg.inc | 3.7 TCR |
| NAICS-TCR | Goldens' Foundry and Machine Company (Columbus) | 3.9 TCR |
| STATE-SIZE | 3M Scott Fire and Safety Monroe Operations | 503 FTE |
| STATE-SIZE | SJP Health Center | 504 FTE |
| STATE-SIZE | 6728-00030023-14 | 505 FTE |
| STATE-SIZE | DLP Harris Regional Hospital LLC | 505 FTE |
| CITY-NEAR | 1101-Carolinas Medical Center (1101) | 8,444 FTE |
| CITY-NEAR | 0001-Carolinas Medical Center | 8,032 FTE |
| CITY-NEAR | 4795-AA-CLT-CHARLOTTE-CLT-TRML | 7,295 FTE |
| CITY-NEAR | Novant Health Presbyterian Medical Center | 4,973 FTE |
| NAT-TCR | Dutch-Way Farm Market Schaefferstown | 3.8 TCR |
| NAT-TCR | Michigan Agricultural Commodities | 3.8 TCR |
| NAT-TCR | Kingspan Insulated Panels Modesto | 3.8 TCR |
| NAT-TCR | Fs2 - Fleet Services | 3.8 TCR |
| NAT-SIZE | Plant L3/LG | 503 FTE |
| NAT-SIZE | Custom Foods of America | 503 FTE |
| NAT-SIZE | Stephenville Plant | 503 FTE |
| NAT-SIZE | Lahey Clinic North | 503 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.