Motor vehicle metal stampings (e.g., body parts, fenders, hub caps, tops, trim) manufacturing · Alabama
Misa Metal Processing Birmingham, Alabama
Birmingham, AL · ~48 workers · 6 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 5.4
- Avg TCR
- 5.4
- Industry avg
- 0
- Fatalities
The verdict
Misa Metal Processing Birmingham, Alabama runs at 100% of its industry's injury rate - about level with the typical Motor vehicle metal stampings (e.g., body parts, fenders, hub caps, tops, trim) manufacturing workplace, earning a grade C.
Misa Metal Processing Birmingham, Alabama: 5.4 TCR = 100% of Motor vehicle metal stampings (e.g., body parts, fenders, hub caps, tops, trim) manufacturing BLS 5.4 · 6y Form 300A (see methodology below)
Misa Metal Processing Birmingham, Alabama safety composite
Misa Metal Processing Birmingham, Alabama scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on dart rate (safer than 2%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
29/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 5.42 per 100 workers
Safer than 39% of industry peers
- DART rate
- F 10.29 per 100 workers
Safer than 2% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Misa Metal Processing Birmingham, Alabama: 3.6 → 10.3 TCR
Peak year 2023 @ 10.3 TCR · DART/TCR 1.9× in 2023
Misa Metal Processing Birmingham, Alabama's TCR rose 6.7 from 3.6 in 2018 to 10.3 in 2023. In 2023, DART was 1.9× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 336370 · Birmingham, AL ABOVE-IND · SMALL
Grade C · TCR 5.4 · 100% of ind
- DART 10.3 DART
- RANK #16/28
- PHOTO Euclid Manufacturing
- BOOK 6y book
- INJ 17 inj
- SIZE ~48 FTE
Nearest TCR peer: Euclid Manufacturing (0.0 TCR gap)
Read with this employer → · Industry book → · Alabama employers → · Look up another →
Misa Metal Processing Birmingham, Alabama in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Misa Metal Processing Birmingham, Alabama
5.4 TCR
- Euclid Manufac
Euclid Manufacturing
5.4 TCR
- Fukai Toyotets
Fukai Toyotetsu Indiana Corporation
5.4 TCR
- Masterguard
Masterguard
5.4 TCR
- GT Technologie
GT Technologies, Toledo
5.4 TCR
What this shows Misa Metal Processing Birmingham, Alabama averages 5.4 TCR (100% of the Motor vehicle metal stampings (e.g., body parts, fenders, hub caps, tops, trim) manufacturing BLS benchmark).
Misa Metal Processing Birmingham, Alabama TCR series: 2018=3.6 · 2019=4.3 · 2020=2.7 · 2021=5.9 · 2022=5.8 · 2023=10.3 · BLS 5.4
Where Misa Metal Processing Birmingham, Alabama falls in its industry
510 Motor vehicle metal stampings establishmentsSafer than 39% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to Alabama alone (the establishments it most directly competes with for workers and contracts): ranked #16 safest of 28 Motor vehicle metal stampings employers in Alabama.
Misa Metal Processing Birmingham, Alabama has fewer employees than the Motor vehicle metal stampings (e.g., bod median and a higher injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 10.3 | 10.3 | 6 | 0 | 0 |
| 2022 | 5.8 | 5.8 | 3 | 0 | 0 |
| 2021 | 5.9 | 2.0 | 3 | 0 | 0 |
| 2020 | 2.7 | 0.0 | 1 | 0 | 0 |
| 2019 | 4.3 | 0.0 | 2 | 0 | 0 |
| 2018 | 3.6 | 3.6 | 2 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
336370 · AL · Birmingham
510 Motor vehicle metal stampings (e.g., body parts, fenders, hub caps, tops, trim) manufacturing employers nationwide with a credible TCR · 7,418 rated employers in Alabama with headcount on file · 840 employers in Birmingham, AL · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Euclid Manufacturing | 5.4 TCR |
| NAICS-TCR | Fukai Toyotetsu Indiana Corporation | 5.4 TCR |
| NAICS-TCR | Masterguard | 5.4 TCR |
| NAICS-TCR | GT Technologies, Toledo | 5.4 TCR |
| STATE-SIZE | Elkmont GP Egg Depot | 48 FTE |
| STATE-SIZE | Southern Division Auburn Office | 48 FTE |
| STATE-SIZE | C & I Enclousres | 48 FTE |
| STATE-SIZE | JOHNSONKREIS Construction | 48 FTE |
| CITY-NEAR | USD | 9,165 FTE |
| CITY-NEAR | CLASSIC FOODS | 9,165 FTE |
| CITY-NEAR | Corporate | 8,650 FTE |
| CITY-NEAR | BIRMINGHAM PACKERS | 8,650 FTE |
| NAT-TCR | Sycamore Precision Inc. | 5.4 TCR |
| NAT-TCR | Sully Station | 5.4 TCR |
| NAT-TCR | Johnson Concrete Co.-Eastern Division | 5.4 TCR |
| NAT-TCR | Highland Tank, LLC | 5.4 TCR |
| NAT-SIZE | Topwin Corporation | 48 FTE |
| NAT-SIZE | Kingsbury Elementary School | 48 FTE |
| NAT-SIZE | Wolfe & Associates, Property Services | 48 FTE |
| NAT-SIZE | Marquis Energy-Wisconsin, LLC | 48 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.