Cutting dies, metalworking, manufacturing · North Carolina
Southeastern Tool & Die
Aberdeen, NC · ~107 workers · 3 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 8.6
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Southeastern Tool & Die runs at 260% of its industry's injury rate - far more dangerous than the typical Cutting dies, metalworking, manufacturing workplace, earning a grade F.
- F
- Failing Safety Record
- 8.6
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 29
- recordable injuries tracked
Grade compares Southeastern Tool & Die's OSHA Total Case Rate of 8.6 to the Cutting dies, metalworking, manufacturing BLS benchmark of 3.3 (260% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Southeastern Tool & Die's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Southeastern Tool & Die falls in its industry
424 Cutting dies, metalworking, ma establishmentsSafer than 8% of graded establishments in this industry, whose median TCR is 3.1.
Narrower to North Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #14 safest of 14 Cutting dies, metalworking, ma employers in North Carolina.
Trend analysis for Southeastern Tool & Die
Between 2021 and 2023, Southeastern Tool & Die's Total Case Rate improved from 10.2 to 7.4 recordable injuries per 100 full-time workers, a 27% decrease across 2 years of OSHA reporting.
The safest year on record was 2023, at a TCR of 7.4, while 2021 saw the highest rate, at 10.2, a spread of 2.8 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 3 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 3 reporting years, Southeastern Tool & Die recorded 29 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 29 injuries, 1 illnesses shown on this page for Southeastern Tool & Die are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 333514 - Cutting dies, metalworking, manufacturing.
DART Rate, Transparent Calculation (2023)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
3 DART incidents × 200,000 ÷ 162,000 hours worked = 3.70 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Southeastern Tool & Die (this establishment) | 8.58 | OSHA ITA Form 300A, 3-year avg |
| Jigs and fixtures for use with machine tools manufacturing industry avg | 3.30 | BLS IIF, NAICS 333514 |
| North Carolina state avg (all industries) | 3.89 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Southeastern Tool & Die to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2023: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 11 reportable incidents · 10 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 13 reportable incidents · 13 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 7.4 | 3.7 | 6 | 0 | 0 |
| 2022 | 8.1 | 2.2 | 10 | 1 | 0 |
| 2021 | 10.2 | 1.6 | 13 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Southeastern Tool & Die's reported OSHA injury record versus its Cutting dies, metalworking, manufacturing peers, not a verdict on whether any single site is safe today.
- At 260% of the Cutting dies, metalworking, manufacturing benchmark, Southeastern Tool & Die reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Cutting dies, metalworking, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Southeastern Tool & Die's safety grade?
How many injuries has Southeastern Tool & Die reported?
Similar Employers
Matched by safety record across the industry, by workforce size within North Carolina, and by nearby establishments in Aberdeen - a different peer set than the category browse links below.
Similar TCR (~8.6)
Similar size (~107 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.